Newbie needs help overclocking

[Kenotic]

I have a 6700k Core i7 and I cant seem to get it over 4.4 stable using easy tune on my Gigabye z170x-UD5. I had what I thought was stable at 4.6 but it crashed when trying to do HandBrake encoding. Right now you can see the setting I had. Any recommendations? 

[TheGamingBarrel]

What are your temps when encoding?

[Imakuni]

1. Forget this EZTune. Use the Bios.
2. Start putting the multiplier at stock.
3. Put voltage on Fixed Mode and input 1.25v
4. Stress test it for about 15min and see how hot it gets. If lower than 80, up voltage a notch and repeat, until you find your max voltage. That's what we are going to work with.
5. Put your multiplier at your desired value. Stress test it for stability. If it works, it works. If it doesn't, bump it down till it works.

[Kenotic]

I am at 1.5 and still have not hit 80 yet. How high should I keep going?

[Kenotic]

12 hours ago, TheGamingBarrel said:

What are your temps when encoding?

It never got above 70.

[NextGenVII]

What cooler are you using? 

[Kenotic]

2 minutes ago, NextGenVII said:

What cooler are you using? 

EK Predator 240 

[NextGenVII]

Mmm, yeah. My best bet is to do this in UEFI... 

[Kenotic]

Ok so fallowing this I was able to get a stable 4.6 and that is what I was shooting for. Thanks guys.