CMOS first boot problems

[Dragonsnap]

I just finished building a PC, the specs were:

-CPU: Intel i7-6700

-GPU: MSI R9 390X

-PSU: EVGA 750W 80+ Bronze Power Supply

-RAM: Kingston HyperX DDR4-2600 RAM

-Storage: Seagate 2TB SSHD, Intel 730 Series 240GB

-Case: NZXT S340

-Cooler: Hydro Series GTX H100i

-Mobo: Z170A MSI Gaming M7

 

The power lights were turned on and even if I pressed the button on the Mobo or the front panel power button, It won't give me even a beep. I tried pulling out the RAM, and it still didn't produce a beep. None of the fans are running, nor the lights except for the ones on the Motherboard. Just a quick note, are the fans that are installed on the top of the radiator supposed to be connected to the CASE FAN ports on the mobo, or the cooler itself?

 

Also, my CMOS light comes on when I press the power switch. Is this relevant, and if it is, how do I fix it?

 

It's my first build EVER, so it would be a lot helpful if you explained things in detail. 

 

Thank you. 

[Amazingjoseph11]

11 minutes ago, Dragonsnap said:

I just finished building a PC, the specs were:

-CPU: Intel i7-6700

-GPU: MSI R9 390X

-PSU: EVGA 750W 80+ Bronze Power Supply

-RAM: Kingston HyperX DDR4-2600 RAM

-Storage: Seagate 2TB SSHD, Intel 730 Series 240GB

-Case: NZXT S340

-Cooler: Hydro Series GTX H100i

-Mobo: Z170A MSI Gaming M7

 

The power lights were turned on and even if I pressed the button on the Mobo or the front panel power button, It won't give me even a beep. I tried pulling out the RAM, and it still didn't produce a beep. None of the fans are running, nor the lights except for the ones on the Motherboard. Just a quick note, are the fans that are installed on the top of the radiator supposed to be connected to the CASE FAN ports on the mobo, or the cooler itself?

 

Also, my CMOS light comes on when I press the power switch. Is this relevant, and if it is, how do I fix it?

 

It's my first build EVER, so it would be a lot helpful if you explained things in detail. 

 

Thank you. 

you may have posted the text in black i think you should edit it 

 

[Bacon8tor]

Try this guide from toms hardware. Make sure you go thru the list each one. http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems