corsair h105 push pull setup help..

vizoomer · September 28, 2015

Hey guys!

i have a 780t cabinet which comes with 2 front mounted 140mm fans.. now i recently bought 3 120mm fans to front mount them for better intake overall but then the 2x140mm fan going to waste would be a shame..

So since i cannot add these fans anywhere else i though i would do a push+pull setup for my h105 which is top mounted.

since h105 is a 240mm rad i am thinking if it will work ? Currently the setup is in a push. if i were to add a pull of 2x140mm would it actually be helpful ?

Thanks in advanced!

UrdnotGrunt · September 28, 2015

it would depend on the fan(s) used. if theyre something like high static pressure fans

vizoomer · September 28, 2015

it would depend on the fan(s) used. if theyre something like high static pressure fans

the 2x140mm fans are the onces which came included with the case.. some sort of corsair led fans..

Corsair Joseph · September 29, 2015

since h105 is a 240mm rad i am thinking if it will work ? Currently the setup is in a push. if i were to add a pull of 2x140mm would it actually be helpful ?

Thanks in advanced!

I don't think that you'll be able to add 140s to pull underneath by default. But if you are able to, performance gain will probably 0 to minimal, especially that you're adding a fan with a different spec (size, cfm, SP) If I were you, I'd keep those stock fans in push config. The proper way to do push/pull config is for you to have 4 fans identical, at least that's the ideal set up.