Jump to content

I just started my bow build and I am replacing the two front 140mm fans on the 780T with three 120mm fans but I can not find which holes yo mount them in. Please help!!

Corsair Graphite 780T | Intel 6700k @ 4.7GHz | Maximus VIII Hero | Corsair Vengeance LPX @ 3000MHz | Asus Strix 980 Ti| Mushkin                                                                                      Enhanced Chronos 256GB | Samsung 850 Evo 500GB | Seagate Barracuda 1TB + 3TB 
 

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/
Share on other sites

Link to post
Share on other sites

I just started my bow build and I am replacing the two front 140mm fans on the 780T with three 120mm fans but I can not find which holes yo mount them in. Please help!!

Well I know for a fact that its possible, because when mine arrives next week I am doing the same thing and I have seen it done many times

 

Have a look at the MB Manual

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/#findComment-6069400
Share on other sites

Link to post
Share on other sites

Okay I found out that I have to mount them on the inside, but there are no bolts to secure them in place.

Corsair Graphite 780T | Intel 6700k @ 4.7GHz | Maximus VIII Hero | Corsair Vengeance LPX @ 3000MHz | Asus Strix 980 Ti| Mushkin                                                                                      Enhanced Chronos 256GB | Samsung 850 Evo 500GB | Seagate Barracuda 1TB + 3TB 
 

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/#findComment-6069413
Share on other sites

Link to post
Share on other sites

I just started my bow build and I am replacing the two front 140mm fans on the 780T with three 120mm fans but I can not find which holes yo mount them in. Please help!!

Seeing this picture though, I see it is possible, but the fans don't appear to be screwed in. Possibly having the fans on the other side screwed in would do the trick.

 

500x1000px-LL-be77f1fd_20140907_001221.j

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/#findComment-6069426
Share on other sites

Link to post
Share on other sites

Well I got them all on but without bolting them in as the second picture shows. It has to be said, this is a bit of an oversight by Corsair. With the front mesh on however it seems to hold them in place well enough. Thanks for all the tips.

Corsair Graphite 780T | Intel 6700k @ 4.7GHz | Maximus VIII Hero | Corsair Vengeance LPX @ 3000MHz | Asus Strix 980 Ti| Mushkin                                                                                      Enhanced Chronos 256GB | Samsung 850 Evo 500GB | Seagate Barracuda 1TB + 3TB 
 

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/#findComment-6069478
Share on other sites

Link to post
Share on other sites

The screws should come with the fans - check the packaging they came in.

To attach them you need to remove the three HDD cages ( three SSD mounts latch to the rear of the motherboard tray - it's easiest to remove these to build in, but less work if you can work around them ) and screw them into the chassis from the inside. This is because of the mesh that goes over the front panel - it doesn't bear weight. It also allows radiators to be directly attached to the frame since it can bear more weight.

Link to comment
https://linustechtips.com/topic/452570-corsair-780t-help/#findComment-6069481
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×