Please help! Is this build ok?

[Alopez]

im replacing my current H60 with a Phantek option and I'm worried that it may be too large and will run into installed RAM or even a the second GTX 770. Here is the list:

http://pcpartpicker.com/user/Alopez/saved/K2Hj4D

[theereal]

im replacing my current H60 with a Phantek option and I'm worried that it may be too large and will run into installed RAM or even a the second GTX 770. Here is the list:

http://pcpartpicker.com/user/Alopez/saved/K2Hj4D

Find out how large the Phantek is, then measure inside your case, should give you the answer

[Alopez]

I can't measure the case because I'm not in the same city right now lol. I was wondering if anyone had run into problems with the Phanteks clearance over Gskill Ripjaws z Series' Ram cards (4x8gb)

[brob]

I can't measure the case because I'm not in the same city right now lol. I was wondering if anyone had run into problems with the Phanteks clearance over Gskill Ripjaws z Series' Ram cards (4x8gb)

 

Sure you can. Azza XT 1 case web page lists cpu cooler compatibility up to 190mm.

 

Phanteks PH-TC14PE web page lists height with fans at 171mm. It also indicates that the fan on the memory side will overhang memory slots. Nominal clearance is 32.92mm. However the fan can be moved up the roughly 8mm needed to clear Ripjaws Z modules.

[Alopez]

I literally came across that line about 190mm clearance accommodation just now. I've been looking at so many measurements today that I guess I just didn't register that part lol. Thank you so much! So I'll definitely be upgrading from the h60 to the Phanteks!