Installing the H100i

[Zvesda]

I am building a new PC. My case comes with a 200mm front. and a 140mm rear. I am also buying 4 SP120 and an H100

 

 

 

200mm Front-Connect to SATA to run 100% constantly

 

140mm Rear-Connect to SATA to run 100% constantly

 

Now the H100 uses the CPU fan header for power and a sata cable that is it right? my motherboard comes with 4x4 pin fan headers which i will need for my SP's. Do i have enough connectors?

[Zayzo]

What case

[Howhurl]

I've never had experience installing AIOs, but i've heard of it. Correct me if I'm wrong, use a splitter for the H100i fans (the 2 fans connect to the same cpu fan header), and then use a sata power cable for the pump.

 

You won't have enough fan headers for the case fans, so buy a few splitters. 2 fans per header is a good config.

[Zvesda]

I'm using the Phantom 530. My motherboard has 4 fan headers so i have enough for the SP's but the other fans i will be hooking straight up to the power supply so i should be good

[Zayzo]

I'm using the Phantom 530. My motherboard has 4 fan headers so i have enough for the SP's but the other fans i will be hooking straight up to the power supply so i should be good

http://www.hardocp.com/article/2013/12/19/nzxt_phantom_530_fulltower_case_review/5#.VZ2L_PkwyHt

 

This artcle should be your answer

[Zvesda]

http://www.hardocp.com/article/2013/12/19/nzxt_phantom_530_fulltower_case_review/5#.VZ2L_PkwyHt

 

This artcle should be your answer

 

I Plan to put the H100 on top and i will have enough room for all the fans. I am just wondering if i use 2 fans to exhaust through H100 out the top which connectors does it use? 

 

USB Header for link-Check

Fans- Right into pump?

Pump- into sata.