Azza CSAZ-103 (Azza "Z")?

[NJMevec]

I'm running a BitFenix Prodigy and kind of want something smaller just to try. Current temps with an H80i on my CPU run about 45C under BF4. The system specs are as follow:

 

GPU - Asus 680 4GB (Dual Slot model)

CPU - Intel i5 3570K @ 3.4 GHz

CPU Cooler - H80i

SSD - Samsung 840 Pro 256GB

RAM - Corsair Dominator Platinum 16GB 1833 (2x 8GB sticks)

PSU - Corsair AX750

Motherboard - Asus P8Z77-I Deluxe

 

Would I be able to drop this into the case and have it not...well...melt? $60 isn't expensive yet nor is it chump change and I don't want to drop the money on it if it won't work.

 

Did Prime95 Stress Testing and stopped it when the temps stopped going higher.

 

[Oct 4 19:30] Worker starting

[Oct 4 19:30] Setting affinity to run worker on logical CPU #1

[Oct 4 19:30] Beginning a continuous self-test to check your computer.

[Oct 4 19:30] Please read stress.txt.  Choose Test/Stop to end this test.

[Oct 4 19:30] Test 1, 6500 Lucas-Lehmer iterations of M12451841 using Pentium4 type-2 FFT length 640K, Pass1=640, Pass2=1K.

[Oct 4 19:32] Test 2, 6500 Lucas-Lehmer iterations of M12451839 using Pentium4 FFT length 640K, Pass1=640, Pass2=1K.

[Oct 4 19:33] Test 3, 6500 Lucas-Lehmer iterations of M12196481 using Pentium4 type-2 FFT length 640K, Pass1=640, Pass2=1K.

[Oct 4 19:34] Self-test 640K passed!

[Oct 4 19:34] Test 1, 800000 Lucas-Lehmer iterations of M172031 using FFT length 8K.

[Oct 4 19:35] Test 2, 800000 Lucas-Lehmer iterations of M163839 using FFT length 8K.

[Oct 4 19:36] Test 3, 800000 Lucas-Lehmer iterations of M159745 using FFT length 8K.

[Oct 4 19:37] Self-test 8K passed!

[Oct 4 19:37] Test 1, 5300 Lucas-Lehmer iterations of M14155777 using type-2 FFT length 720K, Pass1=320, Pass2=2304.

[Oct 4 19:38] Test 2, 5300 Lucas-Lehmer iterations of M14155775 using FFT length 720K, Pass1=320, Pass2=2304.

[Oct 4 19:39] Test 3, 5300 Lucas-Lehmer iterations of M13969343 using type-2 FFT length 720K, Pass1=320, Pass2=2304.

[Oct 4 19:40] Self-test 720K passed!

[Oct 4 19:40] Test 1, 460000 Lucas-Lehmer iterations of M250519 using type-0 FFT length 12K, Pass1=48, Pass2=256.

 

 

So under a 100% load this thing caps at 70C. Not bad since I only hit 45 while playing the games I play. Keep in mind the 2 fans (120mm) on the top are both blowing down and in (yes one of them has the rad from the H80i on it). Front one is blowing in as well. The only air out is the 120mm on the rear and the PSU. If I don't get the new case I may start investing in a water cooling set up for this rig but I know nothing about even where to start. Opinions are needed!