Jump to content

So I am planning a build with water cooling and need some help so I don't totally hose myself. The build will have a i7 3970k and 2 680s or 780s depending on how long it takes me to save up, these are the only components that will be water cooled. I have a cm storm striker white window for a chassis. I would like to know everything I need to so I can pull this off. Feel free to suggest water cooling parts or other components if you want. Thanks a bunch!

Link to comment
https://linustechtips.com/topic/18448-help-me-im-new/
Share on other sites

Link to post
Share on other sites

Probably a good place to start is the "Ultimate Water Cooling Guide" video series that Linus made for the NCIX youtube channel,

http://www.youtube.com/watch?v=aHNFhTAvvBA

 

i7 930 @ 4.2Ghz | Gigabyte X58A-UD7 | Seagate ST2000DX001 SSHD 2TB | WD5000AAKX 500GB | Samsung SH-B083A Bluray Drive | Gigabyte GTX 670 2GB GV-N670OC-2GD | Corsair 12GB 1600Mhz CMZ12GX3M3A1600C9 | Corsair H50 in Push Pull | SeaSonic X750 | CM 690 II Advanced | Windows 7 Ultimate x64 | HP 2159M 1080p | Asus ProArt PA238Q 23" 1080p IPS Monitor | Asus VS239H IPS 1080p (Portrait) | Razer BlackWidow Expert MX Blue (2011) | Razer Lachesis 5600

 

Link to comment
https://linustechtips.com/topic/18448-help-me-im-new/#findComment-215155
Share on other sites

Link to post
Share on other sites

Could you please make diagram of your loop? This not only helps us understand what you want but it also helps you to understand what you want better and makes it easy to spot potential flaws in a loop.

 

To do this simply grab a 2D side on snap of your case. (Just type your case name into google images and scroll down a bit till you find one, it should be there.) Then go to a photo editing program and simply put rectangles where you would like to place your radiators, blocks, reservoirs, pumps and tubing. For blocks use blue, for radiators use red and anything else use grey and for tubing use orange/brown lines with an arrow to point out the intended flow direction of your loop. There is no need to put fans in. This forum has an upload function or you can use an image sharing site and embed the picture into your post. This is an example of this from my personal loop: http://i.imgur.com/MynbfCp.jpg

 

Then simply list all your components you wish to water-cool in a bullet point list and finally list all the water-cooling components you will use when building your loop.

 

It is best if you get a list of components yourself, just go on a water cooling retailer's website and try and get a cart of what you need.

 

If you need more basic help read the FAQ and 101 stickies at the top of the forum.

 

This will help us a lot.

 

Thanks!

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
https://linustechtips.com/topic/18448-help-me-im-new/#findComment-215159
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×