PC won't boot

[OroZero]

Hi guys,

 

i recently finished my new build:

 

• 7600x3d, 
• sapphire 9070xt pulse, 
• msi b850 gaming plus wifi, 
• rm750x psu, 
• 2x16gb kingston fury 6000 CL30 and 
• 2tb sn770)
• Peerless Assassin 140
• Phanteks XT ulra pro

 

My problem is, it wont even boot. I tried replacing components but (i ordered a new mb, new psu, new ram and new ssd). The pc is starting and spinning fans, while before i replaced the components my gpu fans spinned but now they dont anymore. I tried cmos clear, i flashed the bios but nothing is happening at all. I waited several minutes to start 3-10 minutes, but nothing happens at all. I attached some pictures to show how I connected everything, but I cant seem to understand the issue. Also while it wont show up anymore, first time I tried to build it (with replaced components), I had the window with "F1 to run setup...", but it was stuck there, I couldnt click anything and it didnt do anything.

 

Can someone help me with this?

 

[CrispyPsycho]

Try booting with only 1 stick in DIMM2. Rotate sticks to test both. You have EZ Debug LEDs, What LED stays on when you power it on? CPU, DRAM, VGA, BOOT?

[OroZero]

24 minutes ago, CrispyPsycho said:

Try booting with only 1 stick in DIMM2. Rotate sticks to test both. You have EZ Debug LEDs, What LED stays on when you power it on? CPU, DRAM, VGA, BOOT?

I tried but it still wont boot. Both the CPU and DRAM LED stay on while it turns on

[Sawa Takahashi]

27 minutes ago, OroZero said:

I tried but it still wont boot. Both the CPU and DRAM LED stay on while it turns on

Most likely there is something wrong with the CPU.

• Start by clearing the CMOS memory.
• Check all cables and connectors (especially the EPS that plug near the CPU.
• Check for bent pins in the socket and make sure the CPU is mounted with correct and even pressure.
• Did you check if the current BIOS supports your CPU ? It may be time to upgrade your BIOS with M-flash. Then clear the CMOS memory afterwards.
• If the CPU light is still lighting up, you probably have a bad CPU. Time to get it tested on another computer or return for an exchange.

Good luck !

 

[strange13930]

2 hours ago, OroZero said:

I tried but it still wont boot. Both the CPU and DRAM LED stay on while it turns on

what's the pcie connection on the bottom of your motherboard for?

2 hours ago, OroZero said:

 

Hi guys,

 

i recently finished my new build:

 

• 7600x3d, 
• sapphire 9070xt pulse, 
• msi b850 gaming plus wifi, 
• rm750x psu, 
• 2x16gb kingston fury 6000 CL30 and 
• 2tb sn770)
• Peerless Assassin 140
• Phanteks XT ulra pro

 

My problem is, it wont even boot. I tried replacing components but (i ordered a new mb, new psu, new ram and new ssd). The pc is starting and spinning fans, while before i replaced the components my gpu fans spinned but now they dont anymore. I tried cmos clear, i flashed the bios but nothing is happening at all. I waited several minutes to start 3-10 minutes, but nothing happens at all. I attached some pictures to show how I connected everything, but I cant seem to understand the issue. Also while it wont show up anymore, first time I tried to build it (with replaced components), I had the window with "F1 to run setup...", but it was stuck there, I couldnt click anything and it didnt do anything.

 

Can someone help me with this?

 

 

 

 

[OroZero]

1 hour ago, Sawa Takahashi said:

Most likely there is something wrong with the CPU.

• Start by clearing the CMOS memory.
• Check all cables and connectors (especially the EPS that plug near the CPU.
• Check for bent pins in the socket and make sure the CPU is mounted with correct and even pressure.
• Did you check if the current BIOS supports your CPU ? It may be time to upgrade your BIOS with M-flash. Then clear the CMOS memory afterwards.
• If the CPU light is still lighting up, you probably have a bad CPU. Time to get it tested on another computer or return for an exchange.

Good luck !

 

probably it, i will return it and try a new cpu, which i needed to order... thank you

[OroZero]

7 minutes ago, strange13930 said:

what's the pcie connection on the bottom of your motherboard for?

 

i dont use it, i guess its for extra stuff

[strange13930]

2 minutes ago, OroZero said:

i dont use it, i guess its for extra stuff

check the motherboards manual and make sure its not needed to boot.

[OroZero]

8 minutes ago, strange13930 said:

check the motherboards manual and make sure its not needed to boot.

I dont think i can even use that, I only have this slots empty on the psu 

[strange13930]

8 minutes ago, OroZero said:

I dont think i can even use that, I only have this slots empty on the psu 

have you tried reseating the cpu? figured out the bottom power connect is for more pcie power.

[OroZero]

39 minutes ago, strange13930 said:

have you tried reseating the cpu? figured out the bottom power connect is for more pcie power.

yes i did... i just started reading a lot of reviews of msi boards, which had the same issue, i will try getting an asus board and see if it fixes the issues