ASRock Polychrome not working

[Reaper814]

So, I have an ASRock B650M Pro RS Wifi motherboard and I wanted to setup RGB with signalRGB but was having trouble with getting some fans working properly as they were connected to a controller that came with my case which is the Thermaltake V250 ARGB mid tower case. So I installed the thermaltake rgb software first but it said it couldn't detect and controllers. So I thought maybe polychrome was interfering so I downlead the ASRRBGLED tool to try and see if I could control the fans through that. I couldn't and even worse now my CPU fan and RAM couldn't be controlled through signalRGB nor the three lights that are on the motherboard. I uninstalled ASRock's tool thinking it would go back to normal but then I couldn't control my RAM CPU fan or my motherboard RGB at all through any software including the BIOS. I turned off my computer and my RAM was now detected by SignalRGB again and could be controlled, but I still couldn't control or even turn on the CPU fan or motherboard RGB. I decided to try and reinstall the ASRock tool to see if there was a way to just fix it through that but it just gets stuck on the message "Updating RGB LED Firmware DO NOT turn off your system." I have tried uninstalling every tool and tried them all on their own to see if they would work properly and SignalRGB does but only with my RAM and my peripherals. The ASRock tool refuses to load. In the BIOS I tried setting the RGB to a static color and nothing lit up and I tried turning off Polychrome but it didn't even let me turn it off and it is stuck on. I tried to just update my BIOS and see if that would work but it didn't help. I even tried uninstalling each RGB tool with Revo Uninstaller and that appeared to not change anything. I am completely stuck and I would love if anyone had any suggestions. Thank you.