Static

[D4L3YM4TR0N]

Apoligies for the paragraph. I have spoke about this before, I get quite a bit of static through my mic, voicemeter picks it up very well, the only way I can fix this is by turning the volume down almost all the way in the control panel, however, if you couldn't tell, this makes my mic ridiculously quite. I have tried using a different USB for my mic, changed some settings around, changed where my pc is plugged into, now I'm stuck what else to do. I am in the process of saving for a new build and will eventually swap over to an XLR mic but thay will still be a while, so, for now, this is what I have, its a AT2020 usb mic.

Is there any way to test each peripheral in my pc to find out what is causing the static, are there any fixes? Any help, tips or recommendations would be great!

[Skiiwee29]

What GPU do you have? If you have a 10 series or 16xx series you can try out RTX Voice. If you have an RTX 20/30/40 series GPU you can use Nvidia Broadcast. Give those a try and see if it removes the static. 

[D4L3YM4TR0N]

Just now, Skiiwee29 said:

What GPU do you have? If you have a 10 series or 16xx series you can try out RTX Voice. If you have an RTX 20/30/40 series GPU you can use Nvidia Broadcast. Give those a try and see if it removes the static. 

I have a 1660 super, I have thought about using rtx voice but i would then not be able to use voicemeter 

[Skiiwee29]

1 minute ago, D4L3YM4TR0N said:

I have a 1660 super, I have thought about using rtx voice but i would then not be able to use voicemeter 

should be able to. Just change your input from your mic to RTXVoice in Voicemeter. 

[D4L3YM4TR0N]

8 minutes ago, Skiiwee29 said:

should be able to. Just change your input from your mic to RTXVoice in Voicemeter. 

Hmm, okay, I will have a go tomorrow, will let you know, thanks for the idea