Jump to content

Sensor panel for new case ideas

Zero83
By Zero83
in Displays
 Share
Posted

Hi Guys.

Can anyone recommend a good sensor panel for the corsair 7000D. I was looking to mount it right on the psu shroud on the side.

 

I am looking to get one in a case that I can attach with magnets to the shroud and not worry about a short. Then rout the cables.

 

Does anyone have any types of recommendations?

 

Thanks.

Link to comment
https://linustechtips.com/topic/1477851-sensor-panel-for-new-case-ideas/
Share on other sites
Link to post
Share on other sites
Posted
22 minutes ago, Zero83 said:

Hi Guys.

Can anyone recommend a good sensor panel for the corsair 7000D. I was looking to mount it right on the psu shroud on the side.

 

I am looking to get one in a case that I can attach with magnets to the shroud and not worry about a short. Then rout the cables.

 

Does anyone have any types of recommendations?

 

Thanks.

I use this, it's not extraordinary but it works and is relatively cheap (but small, 3.5")

https://www.amazon.com/Screen-Monitor-Computer-Temperature-Display/dp/B09TTHZYSH/ref=sr_1_14?crid=7KSLUGKS2KU&keywords=usb+monitor+panel&qid=1672520750&sprefix=usb+monitor+panel%2Caps%2C140&sr=8-14

AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM / ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Arctic Liquid Freezer III 360 ARGB cooler/  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU/ Alienware AW3420DW 34" 120Hz 3440x1440p monitor / ASUS ROG AZOTH keyboard/ Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to post
Share on other sites
Posted
  • Author

So I was looking at this one

 

Ingcool 7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7 https://a.co/d/fgRLEta

 

Is there a way I can use electrical tape or a magnet to attach it to the side of the psu shroud without worrying about it shorting out?

Link to post
Share on other sites
  • 3 weeks later...
Posted
On 1/1/2023 at 2:02 PM, Zero83 said:

So I was looking at this one

 

Ingcool 7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7 https://a.co/d/fgRLEta

 

Is there a way I can use electrical tape or a magnet to attach it to the side of the psu shroud without worrying about it shorting out?

I have the same case and I use the waveshare 8.8 IPS side monitor for mine.

 

Amazon.com: waveshare for All Raspberry Pi/AI Computer Jetson Nano/PC Windows 11/10 / 8.1/8 / 7, 8.8" IPS Side Monitor 480x1920 No Touch HDMI Display Port Built-in HiFi Speaker, with CNC Process Alloy Enclosure : Electronics

i7-13700K | Asus ROG Maximus Z790 Hero | G.Skill Trident Z5 6800 CL34 DDR5 32GB | Corsair H170i ELITE LCD AIO | Asus ROG STRIX LC RTX 3090 Ti OC | Asus ROG Thor Platinum II 1200w 80+ Platinum | Corsair 7000D Airflow Full Tower |

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Displays

×