Jump to content

Motherboard RAM Compatibility Confusion [Solved]

This may be really basic, but I'm a bit confused on the RAM compatibility specs for motherboard.  The motherboard specs list memory type as DDR4-3000, DDR4-2666, etc, and the memory speed as 3000MHz, 2666MHz, etc, but the RAM specs list the memory type as simply DDR4 and the memory speed as DDR4-3000 etc.  To confuse me further, the speeds listed in memory type and memory speed in motherboard specs don't exactly match, like speed will have 2666MHz, but type won't have DDR4-2666.

I'm trying to figure out if the motherboard below will support the RAM below.  The RAM is 3600MHz, the motherboard memory type doesn't have a DDR4-3600 entry, but the memory speed lists 3600(O.C.).  If I don't overclock anything and my CPU supports 3600MHz, will the RAM run at 3600? 3200 (fastest in speeds without OC)? 3000?  

image.png.1c38f7f7633f720d793968193ea348aa.png

image.png.7946cbbb125d8efd4c981cf337ec3756.png

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, darkextratoasty said:

This may be really basic, but I'm a bit confused on the RAM compatibility specs for motherboard.  The motherboard specs list memory type as DDR4-3000, DDR4-2666, etc, and the memory speed as 3000MHz, 2666MHz, etc, but the RAM specs list the memory type as simply DDR4 and the memory speed as DDR4-3000 etc.  To confuse me further, the speeds listed in memory type and memory speed in motherboard specs don't exactly match, like speed will have 2666MHz, but type won't have DDR4-2666.

I'm trying to figure out if the motherboard below will support the RAM below.  The RAM is 3600MHz, the motherboard memory type doesn't have a DDR4-3600 entry, but the memory speed lists 3600(O.C.).  If I don't overclock anything and my CPU supports 3600MHz, will the RAM run at 3600? 3200 (fastest in speeds without OC)? 3000?  

image.png.1c38f7f7633f720d793968193ea348aa.png

image.png.7946cbbb125d8efd4c981cf337ec3756.png

Anyone can correct me if I'm wrong but I think for the most part RAM speed in the motherboard specs doesn't matter.

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, darkextratoasty said:

3600(O.C.)

DDR4 is a standard which goes up to 3200 Mhz. So anything above that is overclocking. 

If you want it to run at 3600, you will need to enable RAM overclocking in the BIOS. 

My build:

CPU

Intel Core i7 9700 8x 3.00GHz So.1151

 

CPU cooler

be quiet! Shadow Rock Slim

 

Motherboard

MSI B360-A PRO Intel B360 So.1151 Dual Channel DDR4 ATX

 

RAM

16GB (4x 4096MB) HyperX FURY black DDR4-2666

 

GPU

8GB Gigabyte GeForce RTX2070 WindForce 2X 3xDP/HDMI

 

SSD

500GB Samsung 970 Evo Plus M.2 2280

 

HDD

4000GB WD Red WD40EFRX Intellipower 64MB 3.5" (8.9cm) SATA 6Gb/s

 

Power Supply

bequiet! Straight Power 750W Platinum

 

Case

Fractal Design Define R6
3x bequiet! Silent Wings 3 PWM

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, suedseefrucht said:

DDR4 is a standard which goes up to 3200 Mhz. So anything above that is overclocking. 

If you want it to run at 3600, you will need to enable RAM overclocking in the BIOS. 

So without enabling overclocking, if I were to just leave everything stock, would that particular combination run at 3200 or 3000 or not at all?  

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, darkextratoasty said:

So without enabling overclocking, if I were to just leave everything stock, would that particular combination run at 3200 or 3000 or not at all? 

Sorry, but I don't know. 

Personally I use 2666 MHz RAM. 

 

But I think JayzTwoCents made a video about how to make your pc faster for free. It might be explained there. 

My build:

CPU

Intel Core i7 9700 8x 3.00GHz So.1151

 

CPU cooler

be quiet! Shadow Rock Slim

 

Motherboard

MSI B360-A PRO Intel B360 So.1151 Dual Channel DDR4 ATX

 

RAM

16GB (4x 4096MB) HyperX FURY black DDR4-2666

 

GPU

8GB Gigabyte GeForce RTX2070 WindForce 2X 3xDP/HDMI

 

SSD

500GB Samsung 970 Evo Plus M.2 2280

 

HDD

4000GB WD Red WD40EFRX Intellipower 64MB 3.5" (8.9cm) SATA 6Gb/s

 

Power Supply

bequiet! Straight Power 750W Platinum

 

Case

Fractal Design Define R6
3x bequiet! Silent Wings 3 PWM

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, darkextratoasty said:

So without enabling overclocking, if I were to just leave everything stock, would that particular combination run at 3200 or 3000 or not at all?  

It'll run at the highest JEDEC speed in the SPD, which could be as low as 2133 or 2400, but might also be as high as 3200. It depends on how the manufacturer configured the SPD.

 

You should just go to the BIOS and enable XMP.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

Just now, HairlessMonkeyBoy said:

It'll run at the highest JEDEC speed in the SPD, which could be as low as 2133 or 2400, but might also be as high as 3200. It depends on how the manufacturer configured the SPD.

 

You should just go to the BIOS and enable XMP.

Ok, but it would run right?  Like it's not going to just not post because the RAM is too fast or anything yeah?

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, darkextratoasty said:

Ok, but it would run right?  Like it's not going to just not post because the RAM is too fast or anything yeah?

What CPU and motherboard, specifically?

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, HairlessMonkeyBoy said:

What CPU and motherboard, specifically?

Sorry, I guess I should have added some more details.

Motherboard: ASUS TUF Gaming B550-Plus

RAM: Corsair Vengeance RGB Pro SL 16GB (2 x 8GB) DDR4-3600

CPU: Ryzen 5 5600X

I ask the question in the first place because it won't post past DRAM, so I wanted to make sure I didn't have the wrong RAM.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, darkextratoasty said:

Sorry, I guess I should have added some more details.

Motherboard: ASUS TUF Gaming B550-Plus

RAM: Corsair Vengeance RGB Pro SL 16GB (2 x 8GB) DDR4-3600

CPU: Ryzen 5 5600X

I ask the question in the first place because it won't post past DRAM, so I wanted to make sure I didn't have the wrong RAM.

It will work without touching any BIOS settings, and the XMP profile should work just fine, too.

BabyBlu (Primary): 

  • CPU: Intel Core i9 9900K @ up to 5.3GHz, 5.0GHz all-core, delidded
  • Motherboard: Asus Maximus XI Hero
  • RAM: G.Skill Trident Z RGB 4x8GB DDR4-3200 @ 4000MHz 16-18-18-34
  • GPU: MSI RTX 2080 Sea Hawk EK X, 2070MHz core, 8000MHz mem
  • Case: Phanteks Evolv X
  • Storage: XPG SX8200 Pro 2TB, 3x ADATASU800 1TB (RAID 0), Samsung 970 EVO Plus 500GB
  • PSU: Corsair HX1000i
  • Display: MSI MPG341CQR 34" 3440x1440 144Hz Freesync, Dell S2417DG 24" 2560x1440 165Hz Gsync
  • Cooling: Custom water loop (CPU & GPU), Radiators: 1x140mm(Back), 1x280mm(Top), 1x420mm(Front)
  • Keyboard: Corsair Strafe RGB (Cherry MX Brown)
  • Mouse: MasterMouse MM710
  • Headset: Corsair Void Pro RGB
  • OS: Windows 10 Pro

Roxanne (Wife Build):

  • CPU: Intel Core i7 4790K @ up to 5.0GHz, 4.8Ghz all-core, relidded w/ LM
  • Motherboard: Asus Z97A
  • RAM: G.Skill Sniper 4x8GB DDR3-2400 @ 10-12-12-24
  • GPU: EVGA GTX 1080 FTW2 w/ LM
  • Case: Corsair Vengeance C70, w/ Custom Side-Panel Window
  • Storage: Samsung 850 EVO 250GB, Samsung 860 EVO 1TB, Silicon Power A80 2TB NVME
  • PSU: Corsair AX760
  • Display: Samsung C27JG56 27" 2560x1440 144Hz Freesync
  • Cooling: Corsair H115i RGB
  • Keyboard: GMMK TKL(Kailh Box White)
  • Mouse: Glorious Model O-
  • Headset: SteelSeries Arctis 7
  • OS: Windows 10 Pro

BigBox (HTPC):

  • CPU: Ryzen 5800X3D
  • Motherboard: Gigabyte B550i Aorus Pro AX
  • RAM: Corsair Vengeance LPX 2x8GB DDR4-3600 @ 3600MHz 14-14-14-28
  • GPU: MSI RTX 3080 Ventus 3X Plus OC, de-shrouded, LM TIM, replaced mem therm pads
  • Case: Fractal Design Node 202
  • Storage: SP A80 1TB, WD Black SN770 2TB
  • PSU: Corsair SF600 Gold w/ NF-A9x14
  • Display: Samsung QN90A 65" (QLED, 4K, 120Hz, HDR, VRR)
  • Cooling: Thermalright AXP-100 Copper w/ NF-A12x15
  • Keyboard/Mouse: Rii i4
  • Controllers: 4X Xbox One & 2X N64 (with USB)
  • Sound: Denon AVR S760H with 5.1.2 Atmos setup.
  • OS: Windows 10 Pro

Harmonic (NAS/Game/Plex/Other Server):

  • CPU: Intel Core i7 6700
  • Motherboard: ASRock FATAL1TY H270M
  • RAM: 64GB DDR4-2133
  • GPU: Intel HD Graphics 530
  • Case: Fractal Design Define 7
  • HDD: 3X Seagate Exos X16 14TB in RAID 5
  • SSD: Inland Premium 512GB NVME, Sabrent 1TB NVME
  • Optical: BDXL WH14NS40 flashed to WH16NS60
  • PSU: Corsair CX450
  • Display: None
  • Cooling: Noctua NH-U14S
  • Keyboard/Mouse: None
  • OS: Windows 10 Pro

NAS:

  • Synology DS216J
  • 2x8TB WD Red NAS HDDs in RAID 1. 8TB usable space
Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, HairlessMonkeyBoy said:

It will work without touching any BIOS settings, and the XMP profile should work just fine, too.

So my RAM is not the issue (assuming it's not broken), thank you very much for clearing that up for me.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×