gpu artifact only when underload

[dezan]

my rtx 3090 is heavy artifacting, but only when underload, i gotta start mining first then my gpu can go normal even it's normal when gaming, if i don't mine with it, it will start artifact and I can't press anything, is there anyway to fix it? it's happen because after I'm changing the thermal pads, thanks

 

[Ramon Triton]

If it started happening right after you changed your thermal pads your first move should be to open your graphic card again. Double check you didn't forget any thermal pads, that the thermal pads were thick enough to make contact on both side (components and heatsink), check your thermal paste on your gpu and make sure your fans are connected. If everything is ok on the hardware side then you should slightly under clock your GPU and VRAM one at a time while running a benchmark (heaven) in loop to see if it will stop artifacting. Most of the time artifacts are caused by VRAM instability. 

[dezan]

13 hours ago, Ramon Triton said:

If it started happening right after you changed your thermal pads your first move should be to open your graphic card again. Double check you didn't forget any thermal pads, that the thermal pads were thick enough to make contact on both side (components and heatsink), check your thermal paste on your gpu and make sure your fans are connected. If everything is ok on the hardware side then you should slightly under clock your GPU and VRAM one at a time while running a benchmark (heaven) in loop to see if it will stop artifacting. Most of the time artifacts are caused by VRAM instability. 

I've checked it, and i put all thermal pads in place, I've changed the thermal paste as well, and underclock it, but still artifacting when underload

[Ramon Triton]

Alright, are you using pigtails on your pci-e power connector ?

[dezan]

16 hours ago, Ramon Triton said:

Alright, are you using pigtails on your pci-e power connector ?

no i'm not dude, i think i broke something on the inside, so sad

[Ramon Triton]

jeez man, I feel for you, that think is expensive as f***. Can you send us photos of it installed in your case ?

[dezan]

8 hours ago, Ramon Triton said:

jeez man, I feel for you, that think is expensive as f***. Can you send us photos of it installed in your case ?

here it is

[Ramon Triton]

Beautiful build I really do not see problems in there. You should RMA your card.

[dezan]

3 hours ago, Ramon Triton said:

Beautiful build I really do not see problems in there. You should RMA your card.

thanks bro, there's no way to RMA it bro because i voided the warranty, I messed up