Issue booting from usb

[TheDriverator]

Specs 

H110 s2vbgigabyte mobo f24 bios

I3.7100

16gb ddr4 2400 , 1 stick

Gtx 1060 3gb

Psu fractal design 650w used to be ms 400w 

2 hdd and 2 ssd

Tplink wireless card

 

Backstory

I got system without gpu and with 400w psu, so i upgraded to 1060 gpu , and i would get crashes under high gpu load not temp related.

Crashes became more frequent and when it would try to start again psu was trying couple times before it would go , so i bought 650w psu. Then because of all crashes system corupted and didnt want to boot.

 

Problem

I made bootable usb like i usually do with otg cable with my phone and when i select to boot from it it says uefi: name of usb stick but when i press enter it just flashes screen and shows me same menu.

I tried changing usb and bootable files on usb but always same

 

What i tried

Different usb

Disconnecting everything to bare minimum

Bios options like uefi modes csm suports and that windoes8/10 whql thing 

Different install iso on usb

Usb 3 and 2.0 port

 

 

 

[TheDriverator]

I tried all sorts of mix match settings and usb with no luck