AIO Push Pull config with different pressure fans

[Glasody]

Hi all,

 

I am planning to use the H510 Elite case with a X63 kraken AIO for cooling the CPU.

My main concern is that the RGB fans in the front are not static pressure fans and in order to use the AIO at full potential I would need to remove them and put the ones that came with the AIO on (non-RGB)

I have searched for some answers around this, I didn't want to give up on the case because aesthetics, also I didn't want to give up on the AIO as i didn't want a huge nocutua D15 sitting in my build.

 

What am wondering is that, would it be okay to use the RGB fans (500-1500rpm, 0.17 -1.52mm-H20) in the push config on the front and the AIO fans (500-1800 +/-300 RPM, 0.21 - 2.71mm-H20) in the pull config on the back of the rad so i don't loose the RGB and potentially get the most cooling out of the AIO?

Some people say the high pressure needs to push, but some others say that the high pressure fan can pull making it easier for the low pressure fan to push air through.

 

Please Help

 

NZXT H510 Elite: https://www.nzxt.com/products/h510-elite-matte-white

NZXT X63 Kraken: https://www.nzxt.com/products/kraken-x63

NZXT AER RGB and AER P: https://www.nzxt.com/product-overview/aer-series#aer-rgb-section

 

[Eajimoba]

^{Curious about this as well.}