PC Won't turn on with new PSU

[Vin_Ack]

My old PSU turn on perfectly and works great but fails under heavy loads and a 1080GTX, so I've purchased antoher one.

 

 

My new PSU won't turn on

 

[MrJrCookie]

Is the psu turned on? I know it sounds like a stupid question, but a lot of people make that mistake. And do you get any reponse when pressing the power button? Or is it just dead?

[Guest]

5 minutes ago, Vin_Ack said:

 

My new PSU won't turn on

 

 

You're not using any of the old cables from the Enermax still, are you?

 

[Vin_Ack]

Just now, MrJrCookie said:

Is the psu turned on? I know it sounds like a stupid question, but a lot of people make that mistake. And do you get any reponse when pressing the power button? Or is it just dead?

Yes, i change cables and turned on. Even I try to switch on and switch off hybrid mode.

 

Mobo lights were turn on, Fans try to move when I press the power button but after a pair of seconds halts

[MrJrCookie]

Are all the cables plugged in properly?

[Vin_Ack]

13 minutes ago, jonnyGURU said:

You're not using any of the old cables from the Enermax still, are you?

 

Only using old SATA ones, just to test it.

 

PCIe for GPU, Mobo, AC POWER, and 8-pin CPU replaced with the new cables.

[Vin_Ack]

2 minutes ago, MrJrCookie said:

Are all the cables plugged in properly?

Yes, multiple times verified.

[Guest]

16 minutes ago, Vin_Ack said:

Only using old SATA ones, just to test it.

That's why it doesn't work. 

 

Pinout between Enermax and Antec are different. 

[Vin_Ack]

32 minutes ago, jonnyGURU said:

That's why it doesn't work. 

 

Pinout between Enermax and Antec are different. 

Then tomorrow I'll try replacing all SATA Power cables. Thanks for your answer.

 

BTW I've bought the Enermax advised by your review. Great buy!

 

¿Should I replace my Antec for an Enermax model?

[Guest]

1 minute ago, Vin_Ack said:

¿Should I replace my Antec for an Enermax model?

No.

 

[Vin_Ack]

As jonny said, problem was due older ENERMAX SATA/Molex cables.

 

After set up a new cable management and a replacement by Antec ones PSU turns on flawless.