Computer display problem, please help :)

[Captain_Norway]

I have had my computer for  a while now, I have had the problem from after i bought my second monitor. Basically, when i turn my computer on, it doesn't display anything to both of my monitors, i have to basically press the reset button for it to display something. However, it is able to display without me having to reset my computer. I have tried only having one monitor plugged in, but it didn't work either. One monitor is displayport while the other one is hdmi(from DVI to hdmi, Basically a hdmi adapter for a dvi connectionI).  When it boots it always display the loading screen on my hdmi monitor before switching to the main monitor which is displayport.  I suspect it might do something with the motherboard, i put the xmp profile of the ram to 3600mhz, maybe it was to much? That's is the only change i have done in the bios.

 

Also another problem is that my computer can't "remember stuff" Like my chassie fan colors.

 

My build is:

Cpu: r5 3600

Motherboard: msi b450 tomahawk max.

PSU: corsair rm650x v2

gpu: msi rtx 2060 gaming z

ram: corsair rgb pro 3600mhz

ssd: kingston a2000 500gb

hdd: seagate barracuda 1tb

 

Thanks in advanced!

 

 

[The Spectator]

Try either flashing the CMOS or you can just test with your ports on your gpu since some adapters just flat out dont work. Ive had a similar problem with my cabling for my 2 monitors

 

Good Luck!

[Captain_Norway]

1 hour ago, Budddy1 said:

Try either flashing the CMOS or you can just test with your ports on your gpu since some adapters just flat out dont work. Ive had a similar problem with my cabling for my 2 monitors

 

Good Luck!

Thanks for the reply i will try to flash the cmos!