Can't Boot into BIOS

[Dominik2k5]

Hey Guys!

I have a problem with my Gigabyte GA-AB350M-DS3H v2 rev. 1.1 Motherboard cause i can't boot into the bios nor Windows after a bios update!

I installed from F1 to F2 and after that I could boot to Windows or the BIOS but after a restart it didn't work after that!

How can I safe my Motherboard?

 

Here are my specs:

 

AMD Athlon X4 950(not Overclocked)

Motherboard is on top

8GB Gskill Aegis 2666mhz ddr4

128gb intenso SSD sata

500gb Toshiba HDD

GTX 1050 Gaming X 2GB from MSI

Corsair CX550m Power Supply

[Radium_Angel]

8 minutes ago, Dominik2k5 said:

i can't boot into the bios

Why not? What error do you get?

[TheGlenlivet]

Have you reset the CMOS?  

[TheGlenlivet]

Are you 100% sure you installed only BIOS F2?  It looks like all bios after F2 remove support for your CPU...

[W1ll1aming]

so the Athlon X4 950 is supported from f1-f2, i check that in the cpu support site

25 minutes ago, TheGlenlivet said:

Are you 100% sure you installed only BIOS F2?  It looks like all bios after F2 remove support for your CPU...

 

[Dominik2k5]

55 minutes ago, Radium_Angel said:

Why not? What error do you get?

There is no error it just stays black on the monitor

 

[Dominik2k5]

1 hour ago, Dominik2k5 said:

Hey Guys!

I have a problem with my Gigabyte GA-AB350M-DS3H v2 rev. 1.1 Motherboard cause i can't boot into the bios nor Windows after a bios update!

I installed from F1 to F2 and after that I could boot to Windows or the BIOS but after a restart it didn't work after that!

How can I safe my Motherboard?

 

Here are my specs:

 

AMD Athlon X4 950(not Overclocked)

Motherboard is on top

8GB Gskill Aegis 2666mhz ddr4

128gb intenso SSD sata

500gb Toshiba HDD

GTX 1050 Gaming X 2GB from MSI

Corsair CX550m Power Supply

Sorry its not F2 its f31 cause gigabyte recommended me this

[TheGlenlivet]

7 minutes ago, WillLTT said:

so the Athlon X4 950 is supported from f1-f2, i check that in the cpu support site

 

Agreed, and that's what I said.  All bios AFTER F2.

If the OP accidentally installed, or installed without realizing it was, say, F30, that could be the problem.

[Dominik2k5]

43 minutes ago, TheGlenlivet said:

Have you reset the CMOS?  

Yes but still nothin

[TheGlenlivet]

2 minutes ago, Dominik2k5 said:

Sorry its not F2 its f31 cause gigabyte recommended me this

Bingo.

 

Check the support page - https://www.gigabyte.com/Motherboard/GA-AB350M-DS3H-V2-rev-11/support#support-dl

 

Due to BIOS ROM size limited, NO Bristol Ridge (AMD 7^th Gen A-series/ Athlon™ X4 series) APU support.

 

EDIT- Hold on thats for F30, not F31....

[Dominik2k5]

Just now, TheGlenlivet said:

Bingo.

 

Check the support page - https://www.gigabyte.com/Motherboard/GA-AB350M-DS3H-V2-rev-11/support#support-dl

 

Due to BIOS ROM size limited, NO Bristol Ridge (AMD 7^th Gen A-series/ Athlon™ X4 series) APU support.

So can i do something?

[Dominik2k5]

3 minutes ago, TheGlenlivet said:

Agreed, and that's what I said.  All bios AFTER F2.

If the OP accidentally installed, or installed without realizing it was, say, F30, that could be the problem.

But they recommended me that i Think this is strange

[TheGlenlivet]

Just now, Dominik2k5 said:

So can i do something?

Check my edit.  The quote I put in was BIOS f30, not F31.  Not sure if it supports your CPU or not.

[TheGlenlivet]

2 minutes ago, Dominik2k5 said:

But they recommended me that i Think this is strange

I'd contact them one more time to verify 100% that F30 will support your CPU.  

Sorry for the mix up.  

[Dominik2k5]

13 minutes ago, TheGlenlivet said:

I'd contact them one more time to verify 100% that F30 will support your CPU.  

Sorry for the mix up.  

Thanks for All the Help but i will check on a local centre if they could borrow me a processor  like a ryzen 3 2200g cause i Think this will support f30/f31 so i can downgrade