Help with nvram error, no post

[Futuremadman02]

so I have an Asus z10pe-d8 motherboard with 2x4gb of ddr4 ECC reg ram and an e5 2690 v3 CPU and I am getting a postcode of 69 which when I looked it up, means NVRAM initialization. The led next to the ram which would indicate an error is not glowing so there isn't a ram led as far as I can tell. And I have tested two different modules with the same result. I have the ram in the first slot and the CPU in the 1st socket also. I have cleaned the CPU, cleared the CMOS and replaced the battery, and reflashed the bios and installed the most recent one via the flashback function. I have also tested multiple psus to no avail. I'm at my wits end.

 

Here is a link to the board's website https://www.asus.com/us/Motherboards/Z10PED8_WS/ 

[Futuremadman02]

also, here is a Q-Code dump 

Power ON      
0001:01       
0000:FF       
0002:70       
0003:3F       
0006:02       
0004:FF       
0019:FF       
0014:6A       
00A1:13       
00A3:25       
00A7:14       
00A9:13       
00AA:2E       
00AB:13       
00AF:2B       
00B0:FF       
00B1:--       
DUMPing....   
DUMP Finish   
 

[rbrooks007]

Did you ever get an answer to this?

I have same