Search the Community

Hey! I was planning to build a PC with a combination of Ryzen 5600X with Aorus B550 Elite along with Klevv Bolt XR 4000Mhz The specification of the motherboard includes this Support for DDR4 4400(O.C.) / 4000(O.C.) / 3600(O.C.) / 3333(O.C.) /3200/2933/2667/2400/2133 MHz memory modules My question is that can the motherboard actually capable of running the ram on 4000Mhz without any trouble? or in the end, I can't run my ram at its full capability by only running locked at 3200mhz...? Please help I'm really confused because I can't decide whether I should get 4000mhz ram or 32000mhz ram p.s I got 4000mhz memory on a good price deal, so I don't think it's overpriced or overkill

Hey! Yesterday arrived my newly ordered memory kit, and wanted to upgrade my build from 8Gb to 16Gb, but something went wrong... TL;DR at bottom To start it off here is my pc: Asus H97mPlus G.SKILL RIPJAWS 2x4GB 1.5V CL9 1866Mhz (F3-14900CL9D-8GBXL) Intel i5 4590 Antec HCG 520W Asus GTX 760 The one i wanted to add to my system was: 2x4GB Klevv Urbane CL9 1600Mhz 1.5V (Hynix's new brand) I put all 4 them in. Does not work. (NO POST) Take out them and only use the 2 new ones. Working Add 1 old stick. Does not Put the 2 old back. Works Put 1 new stick in does not. I tried every slot and it would not work at all. I was like okay i send the new ones back and put my old stuff back in and try to sell my current ones and try to buy a 16gb kit. But as i did that my pc would not boot with my 2 old sticks. Tried MEMOK Tried Battery out Tried Battery+Jumper Still nothing. I put my new ones in and it works fine. I am like wtf did my old ones broke or what? I did not do any damage to them and i was careful while handling stuff. Also tried the slots as well but no success. I used my G.Skill rams at 1600Mhz and CL9 since i have them at 1.5V so i assumed if all the specs are the same it could work but if it does not i can send them back, however it turned out to be that my old ones got fucked. I ran Windows's mem test it did not find any errors. I ran Memtest86+ 2 passes did not have any issue either. Also the new ram's manufacturer (Klevv) is undefined in the BIOS while my old ones were displayed as it should. (g.Skill) TL;DR: Bought a new kit did not work therefore i wanted to send them back and use old ones but now pc does not boot with old ones. (Not in either slot. Nor in single or dual channel) What can i do to use my old ones again? I have 30 days to send the new ones which i am currently using back Any help is appreciated

I've done with speccing out the upcoming workstation - cum entertainment build. CPU - Intel Core i7-6850K 3.6GHz 6-Core Processor MoBO - Asus ROG STRIX X99 GAMING ATX LGA2011-3 Sorted Corsair Vengeance LED 32GB (4 x 16GB) DDR4-3200 Memory , White and Blue LED's to match up with my colour scheme. Retailer folks Introduced me Klevv DDR4 Cras RAM's last week and I'm immensely in love with the blade shaped LED's, But it comes with either 8 or 4 GB with dual and quad channel setups (3000Mhz at max speed) I'm kinda forced to pick up those beauties, but would end up owning a quad channel setup like 32GB (4 x 8GB) in the end. And in total 64GB max rather than 16GB x 8 equals 128GB which my Mobo supports. The retailer kinda told me that going quad setup with 8GB is perfect than 16GB x 2. Need advice on chossing right speed also the channel setups!? I know more RAM equals more thump, but still.. Thanks.

I have Klevv Bolt, 8GB, 3000Mhz with 15-16-16-30 latency.. Now i want to purchase another 8GB RAM, but i cannot find the same model(Im from India), Can you guys suggest me which RAM should i buy.. All the other RAM i search have different latency.. I use Ryzen 5 3600 and MSI B450 Carbon Pro AC

Hey guys! Fair warning: Total noob when it comes to PC building. I'm looking at two different RAMs for an upgrade: G.Skill Trident Z Neo 16gb 2x8 3200mhz Klevv Cras X 16gb 2x8 3600 Mhz I'm using an MSI Mortar B450 motherboard and a Ryzen 5 2600, and currently with an 8GB 2666mhz RAM, RoG RX580 8GB as my main GPU. What's better when it comes to overall performance of the PC between the two RAMs? Also, I'm using an interface where I have two monitors with two different GPUs. I have an RX 580 for my main display, and a GT 630 for my secondary -- both monitors have the same specs. Question here is does it matter if I use two different GPUs for my main and secondary display? Or should I take off the GT630 and just use my RX580 since it has two ports? Thanks a lot for your answers. I'd like to get some before I do any purchase.

Welcome everybody to my latest log! This one is a remake of a simple build done a few years ago for someone else,this time im remaking it for me,hopefully with none of the facepalm that comes with a sequel! The latest victim is the 'hot from the press' Caselabs BH4,a case designed by Jim and his hardworking team to be a compact case for aircoolers....well...Challenge Accepted as I dont do aircoolers so this build will be a Sli,fully watercooled rig instead. Most of you know,if you cut me in half then the words In Win can clearly be seen like a stick of rock....however,when a case gets my interest then Im going to have to have a go at stamping my style on it,this is one of those cases! First off,lets look at the case. As usual,Caselabs have gone for a thick gauge Alu but opted for a clamshell design rather than the traditional frame and panel design favored by most manufacturers. This saves on weight and materials which is why im guessing Caselabs dont charge the earth for it. Its compact,really compact...however I have a second lower clamshell which will be flipped to make a small rad bay underneath (more on that in the pics). I also went for the dual window option because...who wouldnt?!? Finish is,for now,Caselabs excellent primer finish,I have used this before and found it excellent so I saw no reason not to use it again,thanks to Jim for that as i know its a PITA to change out colours and primers for just one case! Caselabs provide well for storage fiends! 4x 2.5 and 2x 3.5 mounts no less. Board in place... You can see from the pics that I have mounted standoff's to the lower section,this will mount the panel that will hold the rads and the vanity panel on the front. You will probably guess that fitting the GPU's with waterblocks will be hard...well,it is with my choice of cards,the excellent ASUS 980Ti Strix cards,as they are HUGE! Not to worry tho,there will be a form fitting cutout on top to allow the cards and blocks some space. The GPU's,courtesy of ASUS UK! I went for the awesome 908Ti Strix as availability of a second 1080FE to go with the one I have already was next to non existent. Who cares tho when they are as good as this! You can see how tight it is when I did the shakedown... The RAM courtesy of the excellent team at KLEVV,a new sponsor for me and provider of some sexy sophisticated looking RAM,this is their DDR4 CRAS kit....so cool looking! Thanks KLEVV! The motherboard,the awesome X99m WS platform,this was provided by my mate Tom Logan @OC3D,once he found out what I was doing and how much I wanted to use that board,he selflessly offered me his one from his ASUS pron stash!! Good Work that Man!!! And with that gorgeous RAM in situ Its like KLEVV had a picture of that board next to the designers workstation with the memo 'Make it look awesome on that board'.... Watercooling ,as always,comes from the best,EK. Derick was excited to hear of my collaboration with the ever awesome Caselabs so it was not a hard choice to make! As you can see,this will need a post all of its own! PSU's are in the form of dual Corsair SFX series,no ATX will fit in the gap and those GPU's are not on a diet so the back panel will be modded to hold 2 of these,a 600w for the CPU and 1 GPU while the other smaller 450w unit has the second GPU and the ancillary equipment. Im not giving to much away on this yet but you can count on paint,lots of metal cutting and a dirty great res in the front!! Thanks to the teams at Caselabs,ASUS UK,KLEVV,The constantly awesome EK and me old mucker Tom Logan at OC3D for providing me with the support time and again to do what I love. Big kisses guys XX :thumb:

G.SKILL Sniper Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) vs Klevv Neo 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900)

Hello Recently I won an 8GB kit of Klevv Urbane memory (2x4GB). It runs at 2400 MHz and it's DDR3. Should I build a Devil's canyon gaming/workstation system or should I put it up on display and build a Skylake machine?

-------------------------------------------------------------------------------------------------------------------------------------------------------- Hi guys what do u think about "KLEVV Cras DDR4 Gaming Memory Module" is it good and best choose ? -------------------------------------------------------------------------------------------------------------------------------------------------------- What ram from DDR4 minimum mhz is the best on the market now ? -------------------------------------------------------------------------------------------------------------------------------------------------------- And what will be the best incoming if u know ? ( also minimum mhz ) -------------------------------------------------------------------------------------------------------------------------------------------------------- Edit: Also what do u think about Raiden DDR3 RAM Blue plasma tubes Thank you all !! Best of luck in the fields of justice !!! <33