Search the Community

Recently I built myself a new PC and I couldn't start anything past the BIOS screen. Later I realized that I had to download new BIOS for the Ryzen 5000 chip to work and everything worked like a charm. The only problem was that I bought a case that was too small and today I received my bigger one (and an AIO) and moved the system to the new case and installed the AIO. BIOS loads, every component shows up in "board explorer" but after that - can't boot windows. I tried a fresh install but when I plug in a USB drive with windows and boot from it, it gets stuck at a purple screen. If I wait 10 minutes, the normal windows istaller shows up and I can select language and click install and then it gets permanently stuck at the loading screen (I waited for 2 hours and nothing moved). I restarted the system about 100 times to no avail. I tried to hard restart it by stopping the power and pressing the power button to remove all leftover power. I tried reseating the RAM, unplugging and plugging most cables and making sure the rest are plugged in properly (my cpu cable is unreachable and cant be plugged out but i have made sure it is all the way in. I tried flashing the newest BIOS - same stuff. Every fan spins, every component lights up, every component shows up in BIOS and yet - it can't boot. The only things I changed were the CPU cooler and the PC case and I applied thermal paste and everything is connected where it should be. The specs of the system are: CPU - Ryzen 5 5600X AIO - Lian Li Gallahad 240mm with the thermal paste that comes with it Mobo - MSI B550 Mag Tomahawk with newest BIOS GPU - Palit Gaming Pro RTX 3070 in the uppermost PCI-e slot PSU - EVGA 850G (850 Watt 80+ Gold) RAM - 2x16GB Patriot 3600MHz 18CL in the 2nd and 4th slots Case - Lian Li Lancool II NVMe SSD - 500GB Samsung 970 Evo SATA SSDs - 512GB Silicon Power A55 240GB Phillips SSD HDD - 1 TB Seagate I also checked the integrity of the NVMe using the tool in the BIOS and it said "No errors found" (Windows is installed on it) Also, I do have a version of Windows on the Phillips SSD too if that is a problem let me know, but I wasn't a problem last time. I honestly have no idea what to do and it feels like I've tried everything. The only thing I haven't tried is to clear CMOS (read that in another forum but idk how to do it). I also tried lauching without CPU boost and the XMP profile and no change. I also tried turning it off for a while and letting the black screen load for a while - nothing. Basically, no matter what I do - permanent black screen when I try to launch Windows and long purple screen when I boot from a USB followed by a permanent loading screen.

Well, I have an rx480, its coming up with" gpu 0 not detected: failed to see dyamic library "nvcuda.dll". no idea what i can do to fix it. lemme know if you need any more info to help figure out!

So the other day my GPU suddenly stopped when I was going into a CSGO match. Computer also stopped and after I restarted it I couldn't get pass the "Windows falled yada yada yada, Start Windows normally, Starting Windows". The moment the logo fades and I should get the user login the monitor flickers, it searches for source on all inputs and no dice. The computer is still running, just nothing happening. I thought it was the GPU acting up. I tried starting on Safe Mode, it worked, so an hour ago I decied to see if the Mobo is the problem and put my Palit gtx 760 on another pci/e slot. Okay, everything fine. Shit resolution, starting up, everything's okay. Let's update, get the drivers and restart. Until this point no problem whatsoever, I got the latest nVidia drivers and some Windows updates and did a restart. The moment it restarted and stopped showing the boot menu options Windows doesn't load. I'll attach the actual screen I get. It also stays an extended period of time on the initial startup menu (ASRock logo for my Z87 Extreme4). Is it the PSU, Mobo or is it the GPU and what can I do about it if it's the GPU ? Note: After the GPU stopped working I opened it up, cleaned the dust and also replaced the stock termal compound on it.

I have a custom build ( bio star am1 mhp Athlon 5350 msi Radeon R7 360 and 8gb of crucial ddr3 and my computer was working fine I turned it off and unplugged it because of the thunder storm I was having and diddnt want it to surge my pc and now when I go to boot it up it dosent start I can't get into bios it just says error 0xc00021a halfway through boot then tries to fix itself brings me to the options screen I tried different commands that did not work and I tried resetting it and that did not work what do I do?