Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Flaquez

Member
  • Content Count

    3
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About Flaquez

  • Title
    Newbie

System

  • CPU
    Intel Core i5 10400
  • Motherboard
    Gigabyte Z490 Vision D
  • RAM
    Kingston 32Gb DDR4 3000 MHz (2x16Gb)
  • GPU
    Intel UHD Graphics 630
  • Case
    NZXT
  • Storage
    SSD Samsung EVO 860 500 GB X 2 - HDD: WD BLUE 1 TB X 2
  • Display(s)
    Philips 27"
  • Sound
    Antelope Discrete 4
  • Operating System
    Windows 10

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. That's right: the cpu is an Intel Core i5 7400, so the maximum supported frequency is 2400 mhz. But my question was specifically pointed at the CL, which I don't fully understand in this particular case. Perhaps when the bios adjust the ram frequency, it also affects CL?
  2. Hello! I've just installed a new ram module: a 1x16Gb DDR4-2666 Mhz (Kingston HX426C16FB3A/16) According to the Kingston Specifications page ( https://www.kingston.com/dataSheets/HX426C16FB3A_16.pdf ) the CL is 16. But looking at CPU-Z it says "CAS# Latency (CL): 15.0 clocks" (and then other numbers) Is this ok? or there's something I'm missing? Captions:
  3. Tell me about it... I'm from Argentina. We have an import duty of 50% (that's right) and that 50% is after shipping: for example it out something that costs $200 in usa, and the shipping is $ 60, then you have to pay $ 130 in taxes. So it will finally cost $ 390... twice the price in origin. The other problem is that wages are very low right now.. minimum wage is about 130 us dollars a month right now, and going down. A normal wage is about 300/350 (that's considered middle class). So we have to save a lot for a decent computer.
  4. I'm sure you are a great guy. Life is the greatest gift of all... try to live it the best you can. We all have issues, problems and drawbacks but also happiness, joy, family, a couple of very good friends. And then this magnificent universe in which we live in which is like an amazing picture for us to discover and understand (at least a very tiny part of it). And if you think about it, it's all we have Cheers
  5. Hello. I'm new in the forum. After several years I decided to update an old Dell Inspiron 620s PC with a not-so-old i5 4th gen processor, motherboard and memory combo that I had assembled on another build, five years ago. I thought it was a good opportunity to replace the thermal paste, and to my surprise, it was still wet on the corners. The heatsink was the Intel original thermal solution. Is this normal? Or it was perhaps too much thermal paste? Greetings from Argentina
×