EAvirus

Thanks for the suggestion, but I don't have an extra gpu to test it

Yes, I have once

I don't have hw monitor installed I know it from amd driver and GPU-Z

Yes, I have also tested it with GPU-Z

Can anyone please help me with this? I have an ASRock B450 pro4-f motherboard with r5 2600x and a msi rx 570 8gb gpu. I have no SSD just two HDDs. But for some reason my gpu is running at 8x 3.0 instead of 16x 3.0. I'm just hoping nothing is faulty here. And yes I have put the gpu in the 16x slot. I have also reseated my gpu and cpu. I have never updated bios before so I'm a bit nervous about that and I don't know if motherboard has a backup bios if anything goes wrong. Not too sure if it would solve the problem. I have given the bios settings in the attached image. I have updated the graphics card driver twice and also ddu it once. So I don't Think it's a gpu driver issue.

Can anyone please help me with this? I have an ASRock B450 pro4-f motherboard with r5 2600x and a msi rx 570 8gb gpu. I have no SSD just two HDDs. But for some reason my gpu is running at 8x 3.0 instead of 16x 3.0. I'm just hoping nothing is faulty here. And yes I have put the gpu in the 16x slot. I have also reseated my gpu and cpu. I have never updated bios before so I'm a bit nervous about that and I don't know if motherboard has a backup bios if anything goes wrong. Not too sure if it would solve the problem. I have given the bios settings in the attached image. I have updated the graphics card driver twice and also ddu it once. So I don't Think it's a gpu driver issue.

Then what should I to use test my hardware? and cpu temps were 63-65 in cinebench r15 and in r20 it was high 90 degrees and no I couldn't right down the bsod code as system restarted quickly. Now I have the clsid and appid error again in event I guess fixed worked for a very short time

I did stress test with cinebench r15 and r20. Without problem. Right now I have fixed the event log error with regedit let's see if it works. Thank you for your help

So I have built my new pc

Specs:

Ryzen 5 2600x

Rx 570 8gb MSI Armor OC

ASRock B450 Pro4-f Motherboard

8 gb ddr4 3000 mhz RAM from Thermaltake

500 gb + 1tb HDD

550W Antec Semi Moduler 80+ Bronz Certified Power Supply

I assembled my pc myself for the first time it worked perfectly for like 2 weeks. Then windows started to crash in every 2-3 days sometimes with blue screen and sometime it just restarted (specially on startups). Today I reinstalled the windows ran the pc for like 6 hours then shut it down for a minute and then turned it on and while I was working on excel it freezed and I had to forcefully restart it. Tried searching online for solution couldn't solve it. I'm not understanding which hardware is defective (if hardware there is hardware issue). Please help me solve this issue I'm panicking right now. I didn't overclock anything previously enabled xmp profile now I have disabled it.

Hi friends

I have installed my usb controller to my pc and also installed the speed Link driver and using xbox360ce emulator 64 bit and 32 bit depending on the game. Only problem is vibration is not working in games. Vibration does work when I go to usb controller settings and test vibration there it works fine but not working in games. In windows 7 it used to work fine but now I'm in windows 10 and for some reason it does not work. Is it something I need to turn on in Xbox 360ce simulator? Please help me solve this problem. I tried searching online and YouTube and there is only one solution I can find is download and install the speed link driver which I already have.

5 minutes ago, Electronics Wizardy said:

Are you installing windows on a drive with data already?

 

In that case, make backups, then delete the data, then install. 

Ok mate thank you

15 minutes ago, Electronics Wizardy said:

So delte all the old partition, then make one big one.

 

And unplug all the drive but the one you want windows on.

I have lots of data in this can't loose them all. Would MBR fix the problem?

8 minutes ago, Electronics Wizardy said:

yup, chose uefi generic flash disk, the bottom one.

 

Id also unplug any drives you don't want windows installed on

Now the drive is not selecting. I tried formatting the the drive but still not selecting

1 minute ago, Electronics Wizardy said:

yup, chose uefi generic flash disk, the bottom one.

 

Id also unplug any drives you don't want windows installed on

Thank you very much you have saved me a lot time.

2 minutes ago, Electronics Wizardy said:

there is normally a separate boot menu, thats not in the main uefi settings. Try pressing f12 or esc at startup

Should I choose Uefi

Just now, Electronics Wizardy said:

there is normally a separate boot menu, thats not in the main uefi settings. Try pressing f12 or esc at startup

Ok I'm trying then

2 minutes ago, Electronics Wizardy said:

that doesn't seem like the boot menu, that seems like the bios/uefi settings. Look in your manual for the boot menu key.

In boot menu there is boot priority #1, #2 and #3 I have boot option usb flash and uefi flash and the hard drives

3 minutes ago, Electronics Wizardy said:

what does the boot menu show? 

 

You want to select the uefi option, not the plain usb drive.

 

Turn the bios to uefi only if not already.

Main tab, advanced tab, oc tweaking tab, security tab, boot tab, exit tab

Oh  sorry in menu

It just shows which cpu and ram I'm using

2 hours ago, Electronics Wizardy said:

What system specs?

 

What os are you trying to install?

 

Id select the drive to be booted from in uefi mode.

System specs are

R5 2600x

Rx570 8gb msi

ASRock B450m pro4-f

Windows 10 

How to do that can you explain please?

2 hours ago, NZgamer said:

What are the specs of the new system? Is the bootable USB Windows 10?

Yes. R5 2600x rx 570 ASRock b450m pro4-f

Hello friends today I have completed my build and boot the system. I also installed my old hard drive in it with windows 7 installed in MBR format. I have also installed a new hard drive with GPT format. So created a bootable usb drive with GPT format. But this error ocures says I need to convert it in MBR format. I tried to upluge my old hard drive but the pen drive won't boot. And windows 7 is just crashing so I can't change it to MBR format right away. I can get it done from my friend's computer but it will take a while. Can you guys please tell me why is that happening and spare me some time??

16 minutes ago, yasincengiz said:

 

So my friend just tested it with his laptop who has a 1050 with same cpu and ram he can run the game around 60-70 fps

They were playing at low. I don't know what was the problem but this video shows pretty stable fps with same cpu.

14 minutes ago, yasincengiz said:

 

So my friend just tested it with his laptop who has a 1050 with same cpu and ram he can run the game around 60-70 fps

At what resolution my friends were playing at 1080p? For you I will ask them again if they were playing on low or not and let you know. By the way both of them were using i5 7400

9 hours ago, Shammikit said:

So, I should start off by saying Im not a huge fan of the AC series going RPG. I did play Origins last year to see what its like, apart from its graphics and the huge map (which I think was very nicely put together) I didnt enjoy the rest of the game. The story, the combat and the gameplay was meh. When I play AC games, usually the story and the experience sticks in my head for a very long time but this game I forgot even existed after a couple of weeks. I got some free time the past few weeks and I was able to finish all my other games and now I pretty much dont have a game to play. So Im looking at AC odyssey now wondering if I should give it a shot. Do you think this game is worth a try?  

Totally worth it I haven't played the whole game but did play for like 2 hours on my friends computer as I'm still building my computer and I only need to buy the ram now. I enjoyed the game very much the story seems to be awesome

3 minutes ago, yasincengiz said:

1050Ti 4GB

i7 7700HQ

16 GB Ram

 

I have a laptop with these specs and on full low settings I get around 30-40 fps sometimes drops to 15-20 even. I updated the gpu driver put the power setting to max but these didn't fix it. Any idea what's causing the issue? 

Pubg is a very poorly optimized game and 1050ti can't take it any further. 2 of my friends have this gpu they were both disappointed with pubg's performance so one of them quit playing pubg on pc and the other friend upgraded his gpu to 5700xt