VeroVex

Isn't showing up in device manager either, tried with another mobo and same result. Guess i'm getting a new gpu

@SlmoHayha i changed over to my 3200g, and have display when connected to my motherboard. Fans are not spinning on my gpu (rx580) but the blue power light is on. Still no display from gpu when booted into windows

Just tested PSU, all pins including GPU power are at correct voltage. I'll try my old 3200g cpu i guess.

After pressing the on button, my fans and activity lights all turn on, and stay on, but i get zero signal to my monitors. Reseated cpu, gpu, ram, ssd, all connectors on MOBO. No onboard graphics, i have a 2600x

No number display or post code lights on it for some reason, doesnt have a speaker either

Not freshly built, is about 3 years old. It was working fine yesterday. I believe it is not posting, as i get no signal from other monitors, and i know for a fact these monitors are working (tried them with a different pc) i have cleared the bios many times, reseated everything, tried entering safe mode, (power on/off 3 times), tried a different monitor from the 3 i knew were working (tried a 4th). I am lost. I get no motherboard splash screen, i can't enter bios. No signal to monitors whatsoever. No online troubleshooting, including the one pinned in this section, worked.

not really, sometimes it'll struggle to get past login screen, stopcodes are usually repeating there, but as of right now, and a couple other times, it's been good for a good 4 hrs. but out of the blue it will just give me a screen. usually different stopcode aswell

r3 3200g, xfx xxx ed 8gb rx 580, msi b450 tomohawk max, g.skill aegis 2x8 2666, thermaltake 500w, nzxt h510

Been having a large amount of blue screens after changing mobo out from a320mk to a b450 tomohawk max. diff stopcodes each time. what's my best option here? thanks.

Changed my motherboard out from a a320mk to a b450 tomohawk max, having a LARGE amount of issues. About 20 different blue screen errors, network errors, game freezing errors. Is my best bet just to reset my boot drive and reinstall windows fresh?

ended up just using some other partitioning software for windows, thanks though

When I right click on the partition, the menu only shows "help", whereas if i right click the data volume, it shows all of the normal options, so I cannot delete the partitions.

Okay, thanks, I will do that.

When I first built my PC, I had just used an old 1tb drive, and installed the OS on it. (disk 0) After a while, I got tired of the boot speed of the 1tb drive, so I installed an ssd (disk 2), and installed windows on it, without reformatting my original drive, so the os is still on it. I also have a secondary 1tb drive, (disk 1). Is it possible to delete all partitions on disk 0 other than the basic data partition, so that it acts the same as disk 1, and retain all of my files? The OS on disk 1 is not used anymore. Thanks.

Is something like this what you mean? I would need two of these, one at the house plugged into the modem, and another in the shop? does it act as a router? or would I have to connect it to one? I may sound like a moron here, sorry, i'm not experienced in networking.

shop has wooden walls, but tin on the outside of the shop

from china? where do you think all electronics are made? the USA?

At my family farm, we have a house that is maybe 200 ish ft away from the shop. The house is where the modem/router is, and the connection is pretty weak, so it does not reach the shop. Furthermore, there is a lot of traffic inbetween them, and digging a trench for an ethernet cable is just not an option. Is there any feasible way to extend the connection to another router in the shop? Thanks.

sorry for all the replies, i'm really lost here. would i have to move all my games over to my ssd, or can i just move the save files somehow?

do you know how i would go about that?

my ssd is now my c drive, and my hdd is now my d drive. i'm like 80% confident that my hdd was my c: drive before. can i just change the lettering of the drives? sorry if this is a stupid question i suck with storage mediums

So when I built my rig back in september, i had set up a 1tb hdd as an everything drive, and put everything on the same partition because i didn't think to seperate boot and files. Anyways, i just got an ssd, installed windows, and put all my shortcuts on my desktop that direct to my hdd games. Windows is still on the hdd by the way. I open one of my games, and my save isn't there. i check all my other games, nothing. does anybody know why this is happening?

i have 250 gigs left lol. windows takes up a fair amount on my hdd, but if i just keep the os on the hdd, and then install windows on the sdd, i can just use the sdd as the boot, and there wont be any problems with having both installations?

So i'm planning on buying an m.2 ssd to use as a boot drive, maybe store some frequently used games on it, but I stupidly already used a mechanical drive as my boot drive when i built the pc. Can i just install windows on the boot drive, boot from it, and use the hdd as somone normally would as a storage drive? sorry if i'm using confusing wording, i'm not great with storage

an hdd most likely, but could be a shitty fan