Critaek

Hi everyone, joined the team to help! I need some help. I downloaded some activity, and i have 7 total (stopped downloading, i just wanted to test for now). I have 6 running but my cpu is only at 80%, with space to accomodate another one running, but boinc just runs 6. Is this normal? Also i have 100% usage set in the SiDock@home site so it should use all of the avaiable cpu power!

Correct me if i'm wrong, but i think this ASIC's can mine basically any ethash based coins, like etc. So it can just be swapped to another coin, although the profitability is much lower.

I think you are right, thanks for the advice!

Thanks for the answers! I was reading on the folding forum and there are some people already using it (there is a f@h release for ARM cpus), for the electricity part it's not really a problem, they consume very little power (around 5-10 W), even if it only gets 5k ppd it's still worth imo, as i will keep it on 24/7 anyway. So again, does someone knows roughly the ppd of this device?

Hi everyone, i'm planning to buy a raspberry pi 4 B model for pi-hole and something else network-wise, could it be possible to use it to fold at the same time? And if someone knows, what is the expected ppd on a device like that? Thanks in advance!

lol sorry, you're right, i had a thread with similar name

Little update, it changed to compute mode, i have no clue how and when but now it's in compute mode, wtf

Oh i'm sorry that was the epools.txt file, i changed the configs but nothing works, it's like the gpu decided to stay in graphics mode no matter what I think i mught just continue to fold and play games, thanks a lot by the way!

Ok, in the ethermine file i have these options: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal **mywallet** -worker pc -epsw x -mode 1 -coin eth -acm In the eppols.txt file (first time opening it, so it is as i downloaded it), this is the config: # # PhoenixMiner ethash pools list (you MUST rename this files to epools.txt in order to use it) # # The pools specified in this file will be added to the pools specified with the PhoenixMiner's # command-line options (see -pool and -pool2 command line options). # # Alternatively, you can omit the -pool option on the command-line and use only the pools in # epools.txt file. This will give you the ability to specify more than two pools, and to change # the pools without restarting the miner by using the 'r' key in the PhoenixMiner console to # reload the epools.txt file. # # You must put one pool per line as specified in the examples below # If the line starts with '#' it will be ignored as comment # # NOTE: PhoenixMiner also "understands" the epools.txt files from Claymore's dual Ethereum miner # # IMPORTANT: Replace the ETH address with your own ETH wallet address in the WAL: option (Rig001 is the name of the rig) # # These are examples for ETC pools POOL: eu1-etc.ethermine.org:4444, WAL: 0x73066e0D58bccBA84f7A8045507903afB6F2a7eC.Rig001, COIN: etc POOL: eu1-etc.ethermine.org:4444, WAL: 0x73066e0D58bccBA84f7A8045507903afB6F2a7eC.Rig001, COIN: etc POOL: eu.emcd.io:7878, WALLET: gpf.worker, PSW: x, ESM: 0, ALLPOOLS: 0 POOL: eu.emcd.io:7878, WALLET: gpf.worker, PSW: x, ESM: 2, ALLPOOLS: 0 POOL: etc-eu1.nanopool.org:19999, WAL: 0x73066e0D58bccBA84f7A8045507903afB6F2a7eC.Rig001, COIN: etc # The following line shows all possible pool options. The values for each option must follow the # same rules as these specified in the Readme.txt file for the -pool, -wal, -pass, -worker, # -proto, -coin, and -stales command-line options As i stated before this is as i downloaded it, what should i change? Btw for the driver part, i think something is wrong in my pc, i switched to windows 10 just a year or so ago for the compute mode (for f@h) but it never worked, tried some different driver versions, in the end i just installed the newest one and didn't really care. Now i just want to do some mining test, thanks a lot for the effort! Tell me if you need some more info.

I hope this is good enogh, tried to switch to compute mode while mining as well, but nothing, it restart and stays on Graphics, tried a tool i found on another forum that claims to switch all the gpu's (1 in my case) to compute but nothing happened. While searching on the internet i didn't really find anything. Something strange is happening, it should be a simple and easy thing. Thanks! PS: Tried to stop the autotuning clicking g, nothing happens, still the same hash/s, i'll try letting him go. (edit: still the same)

I tried it on phoenixminer, i put: PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal *mywallet* -worker pc -epsw x -mode 1 -coin eth -acm but it doesn't seems to work, i'm getting 9/9.5 MH/s at 1411/2200 (core/mem) when i should get something around 30 MH/s. It's an 8 GB card so no problem with the dag size.

Hi everyone, i'm trying to switch my rx 580 to compute mode (for f@h and some mining tests) but it simply won't switch. I change it, the driver restart and it simply stay in "Graphics". The driver are up to date (20.11.2), and i'm on windows 10. What can i try? Thanks in advance.

Am i the only one who is not getting any covid moonshot WU? I got two few days ago and that's it.

I'll take the white ones, i think they suits better with the mobo and everyting else. Also i'll take some black&white fan's for the case.

Guys, even tho, accordingly to fah main page, the sprint 3 is finished, i'm still getting covid moonshot WU's. Is anyone else still receiving them?