AZ Hobo

After a quick shopping trip, i got this one

https://distrowatch.com/

https://youtu.be/PtMU8nvZzOs

Close but no cigar

https://www.amazon.com/CS3030-Internal-Solid-State-Drive/dp/B07MW9NJSH https://www.tweaktown.com/reviews/9011/pny-xlr8-cs3030-low-cost-nvme-ssd-review/index.html

It's that warm and fuzzy feeling at you know which disk drive you have ?

FREE !!! https://account.protonvpn.com/signup/account

Open the router and look for solder points or pins that say VCC, GND, RX, TX. You connect the TTL cable to the these pins (picture is just an example) Configure your favorite terminal with the following settings: 115200 baud, 8 bit, no parity, 1 stop bit, no flow control. Tp-link Telnet Commands are something like that Login: admin Password: > help ? help logout exit quit reboot adsl xdslctl xtm brctl cat loglevel logdest virtualserver ddns dnsproxy syslog echo ifconfig ping ps pwd sntp tftp wlctl arp defaultgateway dhcpserver dns lan lanhosts passwd ppp restoredefault route save swversion uptime cfgupdate swupdate exitOnIdle wan mcpctl utility

Cannot be done with one expansion card. You need two cards https://picclick.com/?q=usb+3.1+card

https://www.ebay.com/itm/16pcs-RHS-03-Copper-VGA-Chipest-RAM-Heatsinks-Cooling-Memory-Cooler-for-DDR2-/401165559527

A week is a long time without PC

"Silent Witness"

Check that the firewall is not blocking the connection

Maybe this would be helpful