Lutzkhie

last night when opening any browser (opera) the PC freezes for 3 - 5 minutes, every action I make on the browser it freezes and the only way the freezing disappears is when I close the browser, I thought maybe opera is just out of date so I tried the built-in browser edge and it freezes all the same.

I'm not sure about the level but its near the door probably outdoor moisture getting through it?

On a table near the main door actually, I'm thinking of covering it tonight with some cloth, ill be relocating this but not now though Mobo: B450M-Ds3h CPU: Ryzen 5 3600 GPU: RX6800 RAM: 16gb G.skill PSU: Gigabyte P850GM Its an all Gigabyte Aorus Build actually

My PC is not turning on every morning... 2 days ago morning, my PC didnt powered up I removed the gpu then try it up and it worked, I reinstalled the gpu and is now working fine. The next day early morning it didnt powered up again but not for long after I tried turning it on again later it powered up. And now today its not powering up again, I removed the gpu, reset the bios, still nothing works. Until I tested out the PSU by shorting, PSU worked then I reinserted it back to the mobo turn it on and now its working I've seen this before on my previous builds, PC not working every morning leads me to suspect its moisture build up overnight, I'm also seeing some liquid on the fans and upper dustfilter looks dump. but I'm not sure I'm just one man to think of such idea so I want to confirm if this is possible? Could Moisture build up stop a computer from powering up? And how can I prevent it?

Case: Matrexx 70 Mobo: Gigabyte B450m-ds3h GPU: Gigabyte RX 6800 master RAM: G.Skill Trident Z neo x 4 CPU Cooler: Gigabyte ATC800 Ive been planning to replace the stock cooler for my build and I want to go all gigabyte on my first gaming rig (ill upgrade mobo along the way I know its midrange) and so Ive been researching and my GPU RX 6800 with a length of 286mm will fit my case with a allowable clearance of 380mm, next is the ATC800 with a height of 163.3mm virtually fits my case with allowable clearance of 170mm and now I cant find a definitive answer if the ATC800 (RAM clearance of 43mm) will fit the mobo's clearance relative to the RAM especially that this RAM the G.skill trident has more additional height to it, I want to use all slots and I want to make sure the cooler wont get in the way. Thank you to those who may answer.

the 2 3.0 ports in front is able to read my USB with Linux in it. Can someone help me?

hello?

Ive got a recently bought case with 2-usb 3.0 and 1-usb 2.0 slots at the front. It was working fine for sometime until suddenly I noticed that both 3.0 slots are no longer working for any of my USBs (ive got 3 USBs) and even my phone cannot be read it always says not recognized BUT those usb 3.0 slots are only working for my Cruzer fit 32gb Sandisk USB. Ive tried google but all their issues are USB not working at all, while mine is only working for one USB

Its working now, I cleaned it up and reapplied thermal paste, temp is at 34, and I set the fan from semi-active to active. I was wondering, which do you use? Auros Engine? or Gigabyte Xtreme Graphics? or Both. The two seems similar but Xtreme Graphics has more option, I worried that using both may interfere with either setup. What do guys think?

the WD40 specialist im talking about is the "contact cleaner" which says used for electronics part specifically and non-conductive

The problem is my PC would start then after a few seconds or minutes the screen would turn off, sometimes when I turn on my PC it just wont show any display at all. If all else fails, I think ill need save up again and buy a new GPU, im thinking GTX 1660?

card is Gigabyte GTX 1050ti OC ill try that, thanks. What if theres no damage?

I bought a GTX 1050ti almost 2 years ago, and today it keeps turning off the display, I already troubleshooted and narrowed down to the GPU as the issue right now I'm using my old GT 630 gpu which is more than a decade old (but still working while this newer card is already failing). Im thinking of cleaning it but the only thing I found on the local market is the WD40 Specialist which is primarily safe for electronics/pcb's but I wanna ask first. Is it worth it? the WD40 Specialist? and Do you have recommendations for me on how to fix this Thanks for those wholl reply, Id really appreciate it

It was just a generic one - temporarily

I have a Deepcool Matrexx 70 middle tower case specs are found here, I built my first PC but I re-used the PSU from my other PC and I noticed that the PSU wires are not reaching the motherboard's sockets and etc... I was wondering what should fit for this case and what would you recommend. Thank you

it actually compatible with AMD and is easier to install rather than on intel so I wasn't sure which to use

I bought a Ryzen 5 3600 with wraith stock cooler but I have also a Ice Edge Mini FS v2.0, Ive been searching and some say I should use aftermarket cooler but I think thats not always the case because Ice Edge Mini FS v2.0 is lighter than the stock (according to google) which will give better cooling if I use the stock cooler and buy later a much better cooling tower So I just wanted to ask for you opinion? This is also my first time using AMD ive been using Intel before

I tried Sardu, but i noticed that the hirens boot cd pe (new) version isnt working

I tried YUMI but when I try to boot up either HBCD or Windows 10 installation it wont allow me to open the other after rebooting, example if I boot up windows 10 then I restart and try to boot up HBCD it will boot windows 10 instead its the same other way around when I boot up HBCD first then windows later it will still boot up HBCD.

Ive been searching which program to use for multiboot, I dont think winsetupfromusb would work. Here are the ISO i want to add Windows 10 Kali Linux Hirens boot CD and/or UBCD

its back and it working for now, I doubt it totally fixed I can see tearing even during scrolling

I already sent it for warranty I hope they fix it I know right, Im currently using my 6 year old GT630 and it still works perfectly

My GTX 1050 ti goes black screen, and yes its faulty already for only 1 year of usage. So how do you fix a video card like physically? I pretty good at tinkering but dont know where to start first. Was hoping for a video on this channel. Currently watching "Bring your video card back from the dead! - Oven method"

GA-H81M-DS2 Core i3-4160 8gb 1600mhz RAM 700w PSU generic GTX 1050ti 2 HDD's Hello, I'm new here I have a problem, my PC would sometimes freeze into some random colors but mostly black screens. It happens randomly and even during bios. My PSU is pretty old, all other parts are a year old.