Thegrimfew2
-
Posts
26 -
Joined
-
Last visited
Thegrimfew2's Achievements
-
Thegrimfew2 changed their profile photo -
Thank you for the advice. I will look in my area for one. Man do I ever hate having to refit stuff to new apartments.
-
I have but most are out of my price range and too big for my space. I have looked some more for a 16" countertop dishwasher but couldn't find one. I will just have to get a top load one. It's a shame but whatch ya gunna do?
-
Hello, I am moving and I have previously used a countertop dishwasher. I live in an apartment building and hate doing dishes so with my tax return in 2020 I got a dishwasher. I have had a few years of great use out of it but I am moving and it is too tall to fit in my new kitchen. I did some looking around but I can't find one short enough. I am willing to do a non-hookup version but I'd like one that I can hookup to my faucet. The maximum dimensions I can use in the space is 20" (D) X 23" (W) X 16" (T). My max price is $400 USD. I know it is a tight space and a big budget but you never know. I really appreciate any help or advice I get. Thank you all and have a nice day! -TheGrimFew2
-
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
By enabling z hopping its a lot better no snags now -
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
Thanks ya'll, I upgraded the belt tensioner on both printers. I'm still having issues with one of them but one is good. I agree with Colin I think it may be snagging on it but I'm not sure. I've got a camera set up to watch them but I'm not sure. Ill have to watch the video when the test print is done. -
I set the print head to 215°C (God I feel dumb)
-
Hello, I installed a direct drive extruder kit (Swiss). I've been having issues with the feed rate of the kit. I changed the E steps for it to 130 like the kit recommended and have tried turning it down slightly, but nothing has helped. I've looked around but I haven't found a great solution that addresses my problem. Thanks for the help in advance, Grim
-
Hello, I recently bought a Ender 3 Pro. I got it all put together in the correct order and fashion. When I try to auto-home or move the motors through the Motion-> Move Axis-> Move X (Also any others) it makes a click noise and moves the tiniest bit and stops abruptly and makes a sound/motion that sounds/feels like it is trying to move but stuck. It is running version 2.0.6 with all stock parts. I have tried re-seating the connections on all the motors, power cycling (a lot), re-installing the firmware, resetting the system to defaults, and making sure the connections are all correct of the main board. This is my 3rd printer over all, but I haven't had this issue before. Any help is greatly apricated!
-
Yeah sorry they didn't go up ill retry
-
My cat Penelope (Penny). I got her around thanksgiving while I was in a rough patch. She has been amazing and I love her very much. She is very cuddly when I get home from work. She enjoys being swaddled, dont know why but she does. (Don't worry its loose she gets out when she is done or wants to do something else) Here she is in all her glory
-
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
Okay thank you! The print took a good 2 minutes with a scraper tool to take off so I'd say it was. Also I dont know a ton about 3d printers especially belt tension. What is a way you would recommend a good check to see if its tight enough? -
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
@Levent you really are just my guardian angel aren't you? -
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
Printing at 45mm/s. It was standard in the slicer at 60mm/s -
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
Here are some pictures of the first print.
-
ender 3 pro print "exploding" (Solved)
Thegrimfew2 replied to Thegrimfew2's topic in Hobby Electronics
Bed was leveled, slicer config was 25 percent infill, black PLA from microcenter (inland), I actually restarted the print because I forgot the glue, im using purple elmers glue picture soon
