2 hours ago, Bombastinator said:

It’s satellite so the signal will be accessible.  It would also probably require special equipment to access.  If I was the government and wanted to ban starlink I would ban the equipment, or arrange something with spaceX

don't you think the chinese would make some sort of cheaper and easier equipement to sell to those countries illegaly in case those countries ban thos equipements?

Hello everyone, i know it's a bit too late to worry about this but i was wondering if governments could stop it's citizens from using starlink internet in the future, our gouvernement(algeria) refuse any kind of internet competition the only internet company in the country belongs to the government and  it's services are aweful and the prices super high it start from 2 mbps up to 20mbps but since it's super expensive most people use the 2 mbps which sucks so what do you think we can do if the government bans the starlink internet

I had to install Ubuntu on legacy mode and then use EeasyBCD to add Ubuntu into the OS selection menu, Thank you everyone

3 hours ago, Nayr438 said:

For one, I saw mbr mentioned. Create the installer with etcher or rufus in gpt mode for uefi.

I also don't see a EFI partition in that listing, it would be Fat32 with a boot flag. This leaves me to believe windows is installed in mbr mode if they are being installed to the same drive.

yeah windows is on mbr

19 minutes ago, SupaKomputa said:

This is simpler : 

- 2 hdd

- install each OS independently in each drive.

- when boot press F9 (quick boot selector), select your os drive.

- done

it works on one hdd why should i buy the sec?

1 minute ago, paddy-stone said:

You're probably not creating the bootable USB correctly...  try using etcher Etcher

 

or tell us how you are creating the USB. So we can see if it's correct.

i am using rufus on mbr

Hello i am trying to install linux mint on dual boot with windows 10 after i choose the OS partion and start installing i get the message error of "no efi system partition was found ..."

Note :

• if i continue without the efi partition it will finish the installation and when i boot the system it gets stright to windows 10 without giving any message to choose the OS
• if i convert the windows reserved system (not OS) partition to EFI type from NTFS or create a new EFI partition and choose it as the boot loader, windows wont boot and in order to boot linux i'll have to choose an option from the EFI choice in the boot option in the bios
• the picture attached is not mine i just put it to show you the error message

so please do you have any idea how to fix it, Thanks

3 minutes ago, Jumballi said:

1070 is more powerful, but you miss out on some of the driver benefits. That said the power balances out the software benefits, so old stuff is 1070 suited, new stuff is a slight advantage you wouldn't notice the difference to. For new you did get a exception deal.

the price was about 247 $

Hello, should i get he MSI VENTUS XS OC 1660 TI or wait till the RX 5600 XT is out? 

Hello, im on a tight budget ($250 - $275) to choose a graphic card so i can play on my 1080p screen and ive got this few choices, so i would like to have some help to choose the right one

• MSI GeForce GTX 1660 ARMOR 6G OC = $243
• ASUS TUF GAMING 1660 6G OC E
• Gigabyte GeForce GTX 1660 GAMING OC 6G
• MSI GAMING X GTX 1660 6G
• GIGABYTE GEFORCE GTX 1660 SUPER GAMING
   

Note : the prices mentioned are the range of prices for the graphic cards i named above in my country, so those cards are the only choices in that range of prices, Thanks

Hello i have an MSI mpg X570 gamping plus and the bios version installed in it is 7C37vA2 but the latest version is 7C37vA4 and in between there is 7C37vA3, so should i first install 7C37vA3 then 7C37vA4  or directly update from 7C37vA2 to 7C37vA4 ignoring 7C37vA?

Hello, i did my first build using a ryzen 3600 with an MSI X570 and Geil Evo Forza 2 x 8 gb 3200 mhz (xmp activated) and the voltage of the cpu in the bios shows 1.43V with the temperature of 37C for the CPU and 31C for the Motherboard, is that normal? Knowing that i dont have a gpu yet so i used my very old MSI GeForce N210  gpu the time i get an 1660 Ti (i am not gaming on it yet just doing some programming for now)

Hello, what is the best website to buy windows 10 professional key? thanks

1 minute ago, GoldenLag said:

before christmas at some point, we have specs, but for now its OEM launch and at some point in the near future there will be a launch. 

 

if you can find a used rx 580/gtx 1060 6GB, then you wont be loosing out on anything. 

found an rx580 used for mining for a year and seven months for the price of $135

Just now, GoldenLag said:

the cheapest rx 570 costs 190$ equivelent? then its not worth it. 

 

wait to have a look at how rx5500 pricing will be if you have the time, and have a look at the used market. 

 

the gain in performance is not worth 64$. 

when is the release date of the rx5500?

Hello i am on a very tight graphic card budget, i found a deal for a new MSI Ventus SX oc edition GTX 1650 for $126 while there is the RX 570 that cost about $190 at least in my country, knowing that the performance between them is about 10 - 15% so is it worth it to pay the extra 64$ price difference for 10 - 15% performance or should i go with the GTX 1650

Hello, i am thinking of building a mini workstation mainly for programming and somme video editing or should i wait for 2020 for ddr5?

The build is : 

• CPU : Ryzen 5 3600
• MOTHERBOARD : ASUS Tuf B450 Pro Gaming
• RAM : ADATA D41 16gb RAM (2 x 8gb) 3200mhz
• SSD : ADATA XPG TAMMIX S11 PRO 512Go
• HDD : WD 2T
• GPU : RX 580 8gb
• PSU: Cooler Master MWE Gold 650w
• CASE : Cooler Master MasterBox MB530P

Hello i am looking for a budget 16 gb of ram for my ryzen 3600 and i came across DDR4 2 x 08GB 3600 MHZ CL17 XPG SPECTRIX D41 RGB and DDR4 08GB 3200 MHZ CL16 XPG SPECTRIX D41 RGB with a $10 price difference, so which one should i go for?

Hello, i have an Asus Tuf b450 - Pro gaming and i wanna buy a XPG Gammix S11 NVMe PCIe M.2 480GB for it rather than the SX6000 but https://www.userbenchmark.com/ say that they are not compatible so how accurate is? and how do i know what NVMe is compatible with my motherboard?

57 minutes ago, TVwazhere said:

Thermaltake's cases are generally a bit lower construction quality than their competitors, but also cheaper. So you get what you pay for in that regard.

Thank you bro, you were of a great help

13 hours ago, 5x5 said:

It's meh - like any tempered glass case, it will be more fragile than a normal windowless case. But I'd probably take that over the Masterbox. Still loud, though.

is THERMALTEKE ATX VERSA J24 TG RGB FAN any better?

1 minute ago, 5x5 said:

Are any sound-dampened cases available?

here is the most famous website in my country check up this link and let me know if there is any interesting case you see
https://www.ouedkniss.com/annonces/index.php?c=informatique&sc=pieces-pc-fixe&sc2=alimentation-boitier&etat=1&prix_min=12000&p=1&lang=en

Just now, 5x5 said:

It's meh - like any tempered glass case, it will be more fragile than a normal windowless case. But I'd probably take that over the Masterbox. Still loud, though.

THERMALTAKE COMMANDER C34 ?

Just now, 5x5 said:

What country is that? Moving down the list, Antec, DeepCool, BitFenix, what else is available? You can't expect me to believe that only 3 Cooler Master cases exist in the whole country?

you don't know Algeria my friend, what about Corsair Crystal Series 460X Tempered G?