Empire24453

Using windows 11 here, it is a clean fresh install and why it says windows 10 then?

Hello, It was the First Blue screen of death since I installed new RAM 64GB DDR4 at 3600 (2x 32 sticks). It's only been three days. At the time I was streaming and on MSFS2020 with 5 hours into it. Before I used had 32GB at 3200 (4x 8GB sticks) Was going so well, using 40% memory and it pooped again. I updated more RAM so that I never need to go into pagefile.

Thanks, Looking at JBL Tune 760NC - being as it has both wired and wireless - and having a wired option would be cool to have.

After five years my Sony MDRZX310 has packed up on me, it's time to replace it. Before going ahead the Sony headphones that have packed up are my second par and before that, they lasted for the same amount of years. So after Amazoning around XD it seems that "MDRZX310" are still the best buy and used headphones to consider. I was hoping to look for something new or better for the price range, but all I can see regards comparing is the JBL T500, looked into wireless but most of the time it will be used for watching films and YouTube on my tablet or on my laptop. Never would be used outside. The only downside that I do not like about the Sony is after years of use that the wire becomes floppy and twisted and doesn't have that shape anymore XD

1.2v is normal for DDR4 RAM but maybe it's not enough or what Since then, the System is on XMP 1 but not running at 5.1ghz anymore - Using the AI OC method in the bios, I'll keep it as is and if it BSOD again with those settings then back to the drawing board...

Update, I run LinpackXtreme-1.1.5 The first time running gave me BSOF = IRQL NOT LESS OR EQUAL Second, Bios reset to default and LinpackXtreme = Passed no blue screen Lastly, XMP 1 was back on and used the AI OC mode in the bios run LinpackXtreme no blue screen Might be OC not setup right that partly messed things up

Just last night did MemTest86 after 4 hours it resulted as a pass - So I edited the permissions as it sounded like a permission error based on my drives, so I allowed it all for each single drive which resulted in another BSOD However a different error... ""UNEXPECTED_KERNEL_MODE_TRAP"" Minidump.zip

Hello, Before I had a Page error when I edited the permissions. Now I just had another blue screen of death with the error ""UNEXPECTED_KERNEL_MODE_TRAP"" Happening when doing MSFS2020! With 32GB Vram at 3200mhz it can't be faulty as it's passed not saying faulty MiniDump results Minidump.zip Also under Device Manager, says the USB for the Webcam is not working no idea if that would affect the blue screen.

Just had another BIOS @Bjoolz Minidump.zip

File no longer, it's temp and after a simple system cleanup the file goes... no longer have that

Should read onto the C drive anyway.. Seems that my F drive needs to be replaced... It's only 14 to 15 months old At least I have a spare 2TB drive lying around that's the same Should be in warranty still anyway

That's what I use anyway and that's how I know the code was - page_fault_in_nonpaged_area Well, says that my C drive is good, however, my F drive is a 2TB drive (I only have games on it) POOPED. And yet it's not even that old... Ohh Dear ;( Windows 11 is fully updated

Any ideas

Hello - I had a Blue Screen Of Death from page_fault_in_nonpaged_area I was screaming and doing MSFS at the time when it crashed I was 5mins away from landing, was running many tabs on Edge like 5 Twitch pages and so I was using like 70% to 80% of ram I have 32GB RAM and I have done a memory diagnostic test and it passed Soo something not right

I may have worked out the problem, It BSOD when the RAM usage maxed out to 100% based on the PageFile not being set right I mean can't see anything else, and I have edited the PAgeFile now

Good day, 4 hours in doing a flight in MSFS2020 - 5mins out before landing, blue screen of death. Results stated it was ntoskrnl.exe Check for all things updated Run chkdsk C: /f /r /x and the results are in, even though I have no idea if it has errors here.txt Run Windows memory diagnostic and Passed SFC /scannow - nothing to report, passed Run a simple virus scan and nothing to report.. passed again any ideas?

OMG, I just removed the new CMOS from my system and it has a sticky on it with child-proof information, I just removed the sticky and shows 3..29v Soo all this time it can be the DAMN sticky on the battery So edit: see how this goes - might be till a day or so too see if it's worked

Just used the multimeter on old CMOS and says 0.50 or around about there

Nope, not loose, once the system is booting and it's on for 30mins to maybe an hour or so then I turn the system off then 5mins to even 10mins later booted her up again and boots fine and doesn't go into F1/F2 error page. SO the battery is working

Good evening, I'm using (ASUS ROG Strix Z490-E) with an i7 10700k and the problem that I have is that my BIOS keeps resetting to default. For the last two years, I had the same overclocking settings and I wouldn't even call it extreme. One day last week I turned her one and she booted up into an F1 and F3 option. Days after I thought it was the CMOS battery as the date and time kept resetting. So I replaced the CMOS and nothing, I then set the BIOS back to stock, cleared the BIOS to default and only enabled XMP 1 - closed her down and as of today as I booted it did it again So it tends to happen when I turn the system on for the first time for the day, So at night around 10 pm it's turned off power down and then the next day after it's been off for 12 if not more hours I turn the system on and it goes to the error screen with the option to click F2 or F2 CMOS battery Replaced BIOS is updated 2801 IntelMe is patched to the latest

Was testing something but doesn't do anything anyway so I removed it However, never seen """UnsupportedMonitorModesAllow""" Before, I can't remember if it was already in there from when I used the GTX 1660ti or what, now I use the 3090 Or it's always been in the registry

On 3090 so let's get that out of the way. Has anyone else added TdrLevel into the registry and had any problems when set to 0..? I have for the main reasons that some games don't show DLSS, weird but also stated that it can be a bad idea. Let's say I had BSOD and working out what's doing it XD It's down to the GPU drivers. I also have UnsupportedMonitorModesAllow as 1 that's already in there

I give that a try - I was going to consider getting a new Modem anyway to maybe "DrayTek Vigor V166" I'm on 130 at the moment and it's not to expensive compared to the router and it's nearly seven years old. But it's like get the 166 or consider something else?

Good day to you all. For the last couple of weeks, if not more my connection hasn't been all over the place. From not getting the full speed that I should be getting. Becomes slow when downloading from one system and all other devices are just idling/loading forever. Downloading 5GB from a desktop and all other devices is not loading a simple webpage. Over a week ago for two days I was only getting around 22MB for download and uploading around 18MB then after that week passed I was getting full speed of 70 down and 19 up, but in most cases, it's been an unstable connection. as of today it's dropped down again. Last night my connection went off countless times to the point that I lost count, The connection from the router flashed red and green countless times. Watching a film for 10mins then off again for 5mins then back on for another 40mins then off again for 10mins, off and on I have contacted my ISP however they stated that everything looks good from their end and that they have stated it has dipped down many times, all they said was that they will monitor the system. The person on the phone was not very helpful anyway I use ASUS RT-AC5300 - Six years old and the last firmware update it had was a year ago. On the latest updates, however, Asus has not updated the firmware in a year and a bit. So no idea if we going to get any more updates and are also six years old? is it time to update? Also using DrayTek Vigor 130 - Also six years old, Some say it's Router/Modem that needs renewing or if it's into the house from ISP that's pooped..? the Based in UK, TalkTalk is the name even that they use BT, Never really had any problems with this BAD before, using Master socket 5c if anyone does ask... Getting to the point that I'm using my phone data now and fewer films to watch as it's a bit good enough for that

It's disabled, Speeds on Steam are around 2.4 mb/s and web pages are loading a little faster but even then it's still slow.. worst part is I'm paying for 35 downloads and for three weeks not even going up to 35mb/s I can upload faster then I can do with downloading LOL