bagusnl

thank you guys, found the problem. i didnt even remember that i was dumping my friend sdcard to the disk XD. it was 6.5GB now everything worked again. thank you

Hi I have Kali Linux 2018.1 installed. I was pretty stable until xfce stopped working and i've got it fixed so i can get into the desktop (yay). But I get another issue, when i checked disk space using df, then it shows free 0%, but if you see the available and used space it shows that i still have ~200MB of space available. i started removing unneeded packages, it shows no space available. start deleting things, not really helps. look at the attachment (yes i use virtual box linked to actual disk; the problem persist when i boot normally)

You mentioned that IR Camera is not supported yet on POCO F1, then I found this https://www.xda-developers.com/lineageos-16-poco-f1-fixes-touchscreen-support-ir-camera/

me, lol

i think leaks about the real product already went out

reseat ram\gpu\cpu and maybe power connectors

Definitly will check pot player, thanks!

Overclocked my A4-3305M APU to 2,8GHz @1.288v with AMD PSCheck, tested it with OCCT and gaves no errors. But the cpu usage is not consistant, is that okay? Thanks

why did google exist?

is your windows 7 installation drive is x64? because you must use x64 bit on gpt drive

clean fan and heatsink, it might be full of dust. when you cleaning the heatsink you'll replacing your thermal paste too, but, if your laptop still toasty, you can try ramping up fan speed

try memory tester (like memtest for system ram and Video Memory Stress Test )

Yea, im fine with ffdshow raw video filter. But, ffdshow audio processor is useful. I wonder why linus is still using vlc

Im now using FFDShow for my mpc-hc x64, and i found out that its like 3 years old now. im using ffdshow raw video filter to adjust video lumi levels and some post-processing deblocking (not always use post-processing tough). and ffdshow audio processor for loudness control, resample and sometime clarity control. now my setup on mpc hc is LAV Splitter>LAV Video Decoder (DX11 CopyBack)>ffdshow raw video filter>madVR LAV Splitter>LAV Audio Decoder>ffdshow audio processor>Audio Renderer (Internal IDT, set to 24/192kHz) just want to know if there's any better ffdshow-like codecs filter Thanks

my cpu is using 1.4812V on auto boost (2.5 GHz), should disable it? AMD A4 3305M

yes you are. you know Nasi Padang by Kvitzone right? if you buy it at traditional place (not an restaurant) you can get a 1 plates fulled with rice and eggs, that can make you full

@DaBeggad so what your opinion? deepcool z9/z5 ?

9 dollar in here (indonesia) is a big money, you can live with it for 2 days i just have 5.3 (70000 idr) dollar when i borrow my friend money

the price is 114,000 IDR =8.57869USD i dont have buck of money if i just leave to default clock, doesn't help. always jumping to 100 C

i can't do this later because it is my national online shopping day, tomorrow the price is getting higher Deepcool z9 price is 62,500 IDR = ~ 4.70276USD Deepcool z5 price is 45,000 IDR = ~ 3.38600USD Cooler Master price is 65,000 IDR = ~ 4.89089USD 1 USD = 13,290.00 IDR what the best performance/price that i can get?

it is a laptop, i can't change them

i recently 3 times change my thermal paste with the same brand, it has a liquid like oil or something. when i put it to my cpu, it help me decrease cpu temp but after 30 minute of video playback (720p) it goes to 95 C again.

Gross Weight Color Operating Temperature Thermal Conductivity 7g Silver gray -40°C--200°C >4 W/m-K Thermal Impedance Dielectric Constant A Viscosity Net Weight <0.058℃-in2/W >18.05 89.16cps 3.0g is the dielecric constant is not harming my cpu? because my cpu doest have heat spreader, just directlu to the die

what product do you prefer ?

i have AMD A4 3305M Laptop 1.9 GHz (2.5 GHz Boost) overclocked to 2.3 GHz with factory software (AMD FUEL) According to the image, the spikes is pretty awful, when i close the video player (MPC x64) The temp is can jump to 100 C or badly 105 C i want to change my thermal paste, because i was changed with bad one. i want to change with these candidates > Deepcool z3 > DeepCool z5 > DeepCool z9 > Cooler Master v1 i want a non conductive thermal paste because my laptop processod doesn't have a IHS, just directly to CPU die. Note: ignore the MSI Afterburner overclock setting, that setting is does nothing, i cant tell the difference from 592 MHz and 770 MHz Thanks