Katsunaka

Coolermaster HAF XB?

http://www.newegg.com/Product/Product.aspx?Item=N82E16811119265&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Cases+(Computer+Cases+-+ATX+Form)-_-N82E16811119265&gclid=Cj0KEQjwte27BRCM6vjIidHvnKQBEiQAC4MzrTr1yhFOg7G7c3q1XLlxW29TUKEA7hV5bNkkTx5K10AaAlss8P8HAQ&gclsrc=aw.ds

95 bucks

Stick with your CPU for a while. One of my friends is still using a 2600k and it performs well.

I jumped to skylake from the 4790k and beside getting DDR4 I didn't notice a big jump in performance.

Do like my friend does, waits until his current PC's cpu is barely min spec for games, then finally upgrades. Don't be like me and end up with more PC parts than I need.

Currently running my system off one, my AX1200i had an issue and is at corsair.

Just look at my profiile and youll see.

Mine's temporary then ill go back to my 1200w when it gets back.

Don't forget you may need to loosen up your cable management to do it.

Wait.. I'll show you something...

Follow this image. 

The holes will line up. You may have to re do your cable management since it's a non modular PSU. 

That could be the issue. Is the cables are managed on the back of the case, since theres no slack, you can't flip the PSU over.

They sure look like they would line up.

Whats the case? The holes look like they'd line up. Since you didn't mention what case you have.

Why not just flip the bracket over until the holes line up with it facing down.

Just buy an xbox controller and be done with it.  

Titan P, the worlds most powerful graphics card, REQUIRES YELLOW LIQUID COOLING!

No problem, we all start somewhere.

99% of the time the motherboard will be what's limiting it, it's just the 100 series cpus are so old they use tech from years ago. 

Yep. 

Doesn't matter what the board supports if the CPU doesn't support it. If the CPU does support it, then the motherboard becomes the limiting factor. 

Welcome to the crazy world of PC's, where it all makes sense to some engineer who's probably getting his ideas from aliens away.

Yes, if you buy that 8 core, then you can run UP to 2133.

There's other things that decide, but in your motherboards case, using a 100 series CPU, yes.

In most all other cases, no. 

The board supports UP to 2133 if your CPU does.

So if you had a better CPU that fit into that socket, it could run up to those 2133 speeds thats all.

You said it yourself.

The manual mentions of 1333mhz being the limit on 100 series processors, so that's the limit. 

Buying faster ram than your CPU allows would just be a waste of money. Find some ram you like at the 1333mhz or less speed, stick it in there and enjoy!

2 minutes ago, Potato:3 said:

If some don't then I could just play 16:9 with the black bars 

Ive got 2 x34's and deal with the black bars. Although in movies, it's AMAZING. In games, it just sucks. I think I might just end up selling these monitors on eBay as used ones and going back to a flat screen style monitor. 

Curved and Ultrawide was fun for a while, but now it's just a PITA.

Yes, the thing I linked is just the PDF version of that. 

Yes, that works also..

Find Ram on that list from a brand you like and whatever else(like a color you like, a budget friendly price) and use it.

Asus says it'll work, it's the best way to find Ram.

If your CPU doesn't support more than 1066mhz, then thats the speed the ram will run at. If you buy 1366 ram, but the CPU only runs 1066, it'll run at 1066.

Only if the game supports ultra wide resolutions..

Go to Asus's site. 

Find your motherboard on their site.

Click Support, Not ASUS support, but the support link on the motherboard's page. 

It'll bring you to a thing where you can download drivers, programs and such.

Click Memory. Open the Memory Support list, and go from there.

Also known as a QVL. It's ram Asus tested to work with your specific motherboard.

EDIT: https://www.asus.com/us/Motherboards/M5A97_LE_R20/HelpDesk_QVL/

Go there. Open This .. M5A_Series_DRAM_QVL_20140, Find Ram you like, on that list.

I'd rather buy generic paste from Best buy than use mayo.

Might as well complete the meal. Lettuce for hard drive trays, mayo for tim, wrap the wiring in thinly sliced lunch meat. Gatorade in the cooling loop, and bread for "breadboarding" it.

@Mikius10001 Its going to be one of the other.  The case and GPU make the budget hard without going to some REALLY old hardware.

AMD FX 6300 - 135 CDN

Asus 970 Pro Gaming - 157 CDN

Kingston HyperX 16GB DDR3 1866mhz - 84.50 CDN

Sapphire RX480 - 410 CDN

EVGA 600B PSU - 72.50 CDN

WD Blue 1TB 7200rpm HD - 68.50 CDN

Based off Amazon.ca's pricing its 927 bucks, No case. The CM Mastercase Pro 5 is too expensive for your budget. 

I'm not an AMD person. Never built with their stuff at all. This is what I could find that fit the OP's budget. Someone else could probably do better, but it's roughly 760 US or 1000 CDN.

Take that 750 and buy a Strix 1080.

It just looks like a 980ti with a custom waterblock on it with a Bitspower fitting. There's no point in buying an overpriced 980ti when the 1080 is better and the same price. 

If you really want and ROG build, don't forget the $500 US dollar Coolermaster Mastercase 5 ROG Edition for sale on CM's EU web store.

I bought a Razer Mamba TE about 3 months ago to replace my dead MX518.  I bought it was content with it, now over the last 2 weeks it's been nothing but rage with this mouse.

It wouldn't respond, doesn't work half the time. Now the palm rest LED doesn't work. All the wonderful Razer support team has done, is keep saying do the firmware update, well it's firmware is up to date, I've tried it across several PC's, in multiple ports and no fix.

Today I finally fixed it. I taped some fire crackers to it, and lit them.  I don't even care about it anymore. Razer wants to try to say it's the firmware issue, it's more of a hardware issue than soft or firmware issue. I'm never buying another Razer product again. I only bought the mouse because after trying quite a few mouses out in my local microcenter, it was the one that fit the best, had only a few side buttons and was well reviewed online. 

Every response I've got from Razer has been a copy and pasted response, no actual typed words. Just copy and paste this response into an email and hit send. 

Before someone tries to say I spilled something on it, nope didn't get anything spilled on it. Wasn't dropped, thrown or slammed. It was either sitting on the desk being used or it was in my bag on the way over to a friends for some LAN stuff.

Hell, the 518 took 10 times worse than what this mouse seen and never once had an issue. The Mamba TE is currently in pieces blown apart by fireworks in the bottom of the trash can. I'll be going back to Logitech peripherals from now on. 

5 minutes ago, Supermangik said:

Do you have to pay for the mods, or is the mods created by the community base and is free?

All FREE, just download one, install it, and start game.

Some in game mods will depend on an Arma 3 expansion. That's really it. 

http://www.armaholic.com/ is the site to start at.