LordLeewee

yes, this is exactly how it happens.

point me a phone made by a non profit organisation, or any company not in it to make money and keep its share holders happy.

Morning, im looking for some really quiet decent fans that will handle low voltage without pulsing up and down. I'm using them with 2 AIO radiators, but theyre fans so air cooling seem appropriate. now im currently using a pwm noctua fan and a corsair AF fan. The problem with the noctua is that if it drops below 50% it starts pulsing between 0 and 100% which i believe is a common issue with using a pwm fan with voltage control. so, i need 2 120mm fans that will go as low as 20% on voltage, that are quiet and can push a good amount of air through a radiator at 80-100% without sounding let jet engines then either. Thanks in advance

in that pic youd move the sombrero, change the opacity so you can see the image behind it, use the lasso tool to cut out the bits of the sobmbrero you dont want and delet them

Hi, as the title I'm looking for a low pro cooler for a 6700k in a corsair carbide 240. I believe the limit is 120mm and I'm currently looking at a noctua nh-l12, ideally I don't want something that sounds like a jet engine either! thanks

this is from their product page "· Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards"

ffs right ill drain the fucker

mayhems pastel pre mix

yeah whenever i turn it on all i can see and hear is bubbles flowing out of the radiator to gpu and the top hose filling

no i mean once ive popped the cap and let the pressure out then put the cap back on i can squeeze the hoses with no resistance. thne the following day when its been off overnight the hoses will be solid by morning. never cleaned the parts they were all brand new but its on a fresh lot of coolant after being drained and changed heres the current loop. the pump/res is just flat agains that back wall of the case upright (outlet on the left going to rad, inlet on the right coming from cpu)

i should add, the hoses are not swelling like balloons, but you can see a slight difference if you look closely and when i pinch them theyre solid rather than being able to pinch them flat with no resistance once ive released the pressure by taking the cap off using the following pump

sorry for late responses, its ek duraclear hosing and seems good quality. the increased pressure seems to build up when the full system system is off. its so strange, like now my system has been off overnight the highest hose in my system which is between cpu and pump is visibly empty of coolant, and if i pop my reservoir cap off it will overflow due to the pressure ( it was topped right to the top when i last bled and ran the system.

theres no way theres a leak anywhere, you can see the hoses physically swelling and the amount of pressure that builds up in the reservoir makes a hell of a pop when i unscrew it. ive topped it right to the very top even though there wasnt much air in there at all.

the air in the top of the reservoir is moving to the radiator, but the hoses are visibly swelling when the system is powered down, so when i take the cap off the coolant level in the reservoir rises again

Hi guys hopefully you can help, im using the EK A240G kit with a pump/res combo and single 240mm rad. it currently goes pump/res - rad - gpu - cpu - pump res. I cant seem to get it to bleed properly, i have to bleed the air every time i turn my system on. ill move it all over and get the air out and itll be fine for hours but then when i turn it off overnight the system will build up air pressure which you can feel in the hoses so i have to pop the cap and then ill have to clear loads of air from the radiator again. ive tried flipping the radiator and moving the pump so the in/outlet of the pump is physcially higher than the radiator in/out and also putthe radiator before and after the pump within the loop but im still having the same problems so it doesnt seem related to configuration?

8gb is enough now, dont think ive ever seen my 1080 use more than 6 and a half gb, and thats gaming at 4k. in a few years it might not be but in a few years new cards will have more. thats unfortunately what happens when you stick with older hardware for whatever reason

go for an FE, they overclock well. A friend of mine just got a founders 1080ti last week and its hitting 2025mhz on the stock cooler. Go for EVGA though i think theyre the only company who wont void your warranty for fitting a water block

i currently have a micro atx board with an i7 and 4x4gb ddr3 ram, as well as 600w atx sized psu and a reference 980 ti on the way. I'd really like to get all of that in a small-ish case to go under my tv. the main problem seems to be most are too long at 390mm+ causing them to poke out of the front of my tv stand regardless of height. I can go as tall as 250mm. Does anyone have any suggestions??

on the beta in 4k at ultra i seemed to average around 45fps i never saw anything in the 20's (1080, 6700k)

fingers crossed i can get around £450 for my FE 1080 eh. cheap that 1080ti, i was expecting another hundred or 2

see here its no longer than the matx motherboard

i just put an msi 1050ti in an acer tower yesterday as a temporary system for a friend, it was a surprisingly small card so id say it would easily fit in that case you have since it looks bigger than this acer

my founders sits at 2000+ all day long.

My 4 month old xps 15 fell off my bed a few days ago when i fell asleep using it, the corner of the lid by the hinge has bent enough to leave a visible line but no other damage. I may try and bend it back

its apple, it will most probably work perfectly, fluidly and have very decent implementation for the majority of users. whether you like it or not you cant deny that, and also during 2017 most other manufacturers will start trying to copy it.