dondan
-
Posts
50 -
Joined
-
Last visited
6 Followers
Recent Profile Visitors
1,860 profile views
.thumb.png.2b37a2d242d91f04d784eacf0a8d9e14.png)
dondan's Achievements
-
64C/128T Epyc, AsRock ROMED4ID-2T & RTX 3080 in 12L -
Here are some pictures of the silver version with radiator on top. Sorry for the image quality I only have a smartphone here and the light wasn't that good outside.
-
Here are the preview results of the first test with the C4-SFX. Testsetup: Ryzen 7 1700 @ default clock Asus Strix B350-I Nvidia Titan X (Pascal) 32GB DDR4 Corsair 450 SFX Asetek 120mm AIO (27mm Radiator) 2x Noctua NF-A12x25 I used Prime95 (26.6) 8K run for max CPU load and Valley Benchmark 2.5K simultaneous. The case fans spin at 100%. Radiator on Top ---------------------------------------CPU--------GPU Clock----GPU FAN----GPU temp-----Room FAN push out - open------------50 °C------max 1800------2350 rpm------82 °C------25 °C FAN push out - vented----------50 °C------max 1780------2380 rpm------82 °C------25 °C FAN push out - Window--------52 °C------max 1780------2410 rpm------83 °C------25 °C FAN suck in - open--------------50 °C------max 1800------2350 rpm------81 °C------25 °C FAN suck in - vented------------50 °C------max 1780------2380 rpm------82 °C------25 °C FAN suck in - Window----------52 °C------max 1780------2410 rpm------82 °C------25 °C Radiator on Bottom ----------------------------------------CPU--------GPU Clock----GPU FAN----GPU temp-----Room FAN push out - open-------------54 °C------max 1780------2380 rpm------82 °C------25 °C FAN push out - vented-----------56 °C------max 1780------2400 rpm------82 °C------25 °C FAN push out - Window---------57 °C------max 1780------2430 rpm------83 °C------25 °C FAN suck in - open---------------52 °C------max 1780------2380 rpm------82 °C------25 °C FAN suck in - vented-------------56 °C------max 1780------2410 rpm------83 °C------25 °C FAN suck in - Window-----------56 °C------max 1780------2410 rpm------83 °C------25 °C
-
Lian Li build the prototypes again and now the quality is very good. Here are some pictures of the top i/o version: Here are the pics of the side i/o version: With best regards Daniel Hansen
-
Here are some more pictures of the C4-SFX. Yes you look right there is no type-c port on the i/o. I tried everything to keep it but the port itself requires a very long part behind the port that will collide with the front hdd. The supplier make some tests to make it shorter but failed.
-
Here are some first shots of the C4-SFX made by Lian Li. I will get more the next days. Keep in mind, that the Window panel screws are not the correct one. Currently you see a acrylic sample of the Window Kit because the tempered glass version isn't done: With best regards Daniel Hansen
-
@enome Q1: The maximum supported length is 303mm, but I specified it for 295mm for easy installation. Q2: - 10mm Q3: Prototypes are in production. I will have the first samples in the next 2-3 weeks. Kickstarter will start end of May or early June. Q4: Same procedure as for the A4-SFX I will talk with Demcifilter.com Q5: The case will have a logo at the front. I think without it the front looks very boring. Q6: Wallye TACTIK DUFFLE V2 should fit. I will talk with Wallye about this topic.
-
It will also fit in the current version. (X52 pump height = 52mm | Max height = 64mm) Sorry a 3.5" drive will not fit. You can fit 3 x 2.5" drives + M.2 SSD on board. So you can fit 3x 4TB = 12TB & 2TB M.2 = 14TB. Sorry this was an old survey, I made the decision to not include fans because every customer has a different opinion about what is the perfect fan.
-
I like to introduce an easy way to install a watercooling solution for both CPU and GPU inside the C4: Alphacool Eibaer LT Alphacool Eiswolf GPX -available for nearly every GPU. -if you have a last generate GPU and it isn't on the list send them your card and get a free GPU block.
-
Here is dual 120mm AIO rendering. (click for 8K image)
-
Here are the final renderings. Now I start with prototyping
-
I wish you and your family a merry Christmas and good fortune, success and well-being in the New Year.
-
Survey three reloaded! Hi there, this is the third survey for the C4-SFX again. I restarted the old one, because I included a new option and a new voting mechanism. In this survey you will be able to give every design a score. 3 points will be the highest score while 1 is the lowest. The advantage of this mechanism is, that I will also respect your opinion about the other options. Link to survey: Google Forms Survey Thank you for your help!
-
Tomorrow I will restart the last poll with three options: (click for 4K) A special thank to AlMiDaX for the idea on the new option.
-
A Hardforum member had also this idea:
