-
Posts
977 -
Joined
-
Last visited
Reputation Activity
-
ciobanulx got a reaction from TraskJ in Maul (modded Corsair 600C) by SimpleModz
Hey guys!
I just want to share the videos of the build as well for those interested.
I did a time-lapse and showcase video and also a case mod summary video!
Hope you guys enjoy them
https://www.youtube.com/watch?v=110KSU3xgdQ
https://www.youtube.com/watch?v=ERXf4sWzf4A
Thanks for checking it out!
Cheers,
Alex
-
ciobanulx got a reaction from Mutoh in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here's most of the piping done!
One issue I had with this is that two of the pass through fittings were way too close to each other and I only had Bitspower C47 style fittings that were a bit too large. So I ended up hand filing them down.
This was the result:
Just shaved off a few mm and they fit perfectly with a bit of tubing between them.
They're the ones at the very bottom.
Mounted the RGB LED controller for the Corsair fans in the front as well. This will be accessible from the side even with the front panel on.
And here's a look at the cable management.
And now the inside.
The red chrome tubes, with the fittings in the middle is a reference to the dual lightsaber.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Hey guys!
I just want to share the videos of the build as well for those interested.
I did a time-lapse and showcase video and also a case mod summary video!
Hope you guys enjoy them
https://www.youtube.com/watch?v=110KSU3xgdQ
https://www.youtube.com/watch?v=ERXf4sWzf4A
Thanks for checking it out!
Cheers,
Alex
-
ciobanulx got a reaction from 19_blackie_73 in Maul (modded Corsair 600C) by SimpleModz
Hey guys!
I just want to share the videos of the build as well for those interested.
I did a time-lapse and showcase video and also a case mod summary video!
Hope you guys enjoy them
https://www.youtube.com/watch?v=110KSU3xgdQ
https://www.youtube.com/watch?v=ERXf4sWzf4A
Thanks for checking it out!
Cheers,
Alex
-
ciobanulx got a reaction from TraskJ in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here are the final photos! I hope you like it, I'm really happy with this one!
The only thing that might need to be changed or improved is the light behind the Darth Maul face on the front panel. The white acrylic would need to be changed to opal and get some better lighting in there so that the front panel pops nicely in the dark.
I'd like to say a huge thanks to the companies that helped me bring this project to life!
Here we go! I'll start with the outside first!
And here's the inside!
Thanks for checking it out and stay tuned for a video once I get back from COMPUTEX!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here are the final photos! I hope you like it, I'm really happy with this one!
The only thing that might need to be changed or improved is the light behind the Darth Maul face on the front panel. The white acrylic would need to be changed to opal and get some better lighting in there so that the front panel pops nicely in the dark.
I'd like to say a huge thanks to the companies that helped me bring this project to life!
Here we go! I'll start with the outside first!
And here's the inside!
Thanks for checking it out and stay tuned for a video once I get back from COMPUTEX!
Cheers,
Alex
-
ciobanulx got a reaction from 19_blackie_73 in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here are the final photos! I hope you like it, I'm really happy with this one!
The only thing that might need to be changed or improved is the light behind the Darth Maul face on the front panel. The white acrylic would need to be changed to opal and get some better lighting in there so that the front panel pops nicely in the dark.
I'd like to say a huge thanks to the companies that helped me bring this project to life!
Here we go! I'll start with the outside first!
And here's the inside!
Thanks for checking it out and stay tuned for a video once I get back from COMPUTEX!
Cheers,
Alex
-
ciobanulx got a reaction from Sneling in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
Time to start focusing my attention back to this build log and get it all up to date! I've been pretty busy as always however the build is finished and I will unveil it over the next couple of days.
I just want to show you guys all the progress first and I still need to take final photos and film it.
I'll start with two massive 10TB Seagate IronWolf HDDs that are going in the build, a plethora of red Bitspower fittings and the simple weathering effects done to the case.
Hope you guys like it. Same as the front panel that I shared before, I wanted the build to look like it's been through a Star Wars space battle. The paint effects were done by dry brushing some simple acrylic paint, a very easy effect to achieve. You can also see an acrylic motherboard skirt cover panel.
Stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Sneling in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
These were the final photos I took before getting all the panels on and finishing the build
As you can see, I went with black coolant and I also have a few red cold cathodes in there just for some more lightsaber references
Stay tuned for final pics!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
These were the final photos I took before getting all the panels on and finishing the build
As you can see, I went with black coolant and I also have a few red cold cathodes in there just for some more lightsaber references
Stay tuned for final pics!
Cheers,
Alex
-
ciobanulx got a reaction from mikeeginger in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
These were the final photos I took before getting all the panels on and finishing the build
As you can see, I went with black coolant and I also have a few red cold cathodes in there just for some more lightsaber references
Stay tuned for final pics!
Cheers,
Alex
-
-
ciobanulx got a reaction from mikeeginger in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here's most of the piping done!
One issue I had with this is that two of the pass through fittings were way too close to each other and I only had Bitspower C47 style fittings that were a bit too large. So I ended up hand filing them down.
This was the result:
Just shaved off a few mm and they fit perfectly with a bit of tubing between them.
They're the ones at the very bottom.
Mounted the RGB LED controller for the Corsair fans in the front as well. This will be accessible from the side even with the front panel on.
And here's a look at the cable management.
And now the inside.
The red chrome tubes, with the fittings in the middle is a reference to the dual lightsaber.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from TraskJ in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here's most of the piping done!
One issue I had with this is that two of the pass through fittings were way too close to each other and I only had Bitspower C47 style fittings that were a bit too large. So I ended up hand filing them down.
This was the result:
Just shaved off a few mm and they fit perfectly with a bit of tubing between them.
They're the ones at the very bottom.
Mounted the RGB LED controller for the Corsair fans in the front as well. This will be accessible from the side even with the front panel on.
And here's a look at the cable management.
And now the inside.
The red chrome tubes, with the fittings in the middle is a reference to the dual lightsaber.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Hi guys,
Here's most of the piping done!
One issue I had with this is that two of the pass through fittings were way too close to each other and I only had Bitspower C47 style fittings that were a bit too large. So I ended up hand filing them down.
This was the result:
Just shaved off a few mm and they fit perfectly with a bit of tubing between them.
They're the ones at the very bottom.
Mounted the RGB LED controller for the Corsair fans in the front as well. This will be accessible from the side even with the front panel on.
And here's a look at the cable management.
And now the inside.
The red chrome tubes, with the fittings in the middle is a reference to the dual lightsaber.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
The motherboard I'm using is the ASUS Maximus VIII Extreme with a full cover Bitspower Monoblock that I decided to remove the top cover from and have it exposed. The acrylic would probably do with some polishing however for this build, in terms of the other aesthetics, I think it should work well as is.
The two ASUS STRIX GTX 980Tis, still pretty good cards even today, with Bitspower full cover water blocks.
And the memory I'm using is the Corsair Vengeance red LED
They're pretty good how you can easily remove the tops to orientate the Corsair logo to better suit your build.
The tops could even be painted quite easily for further customisation.
And here's everything mounted inside, with tubes in so I can mark for the pass-through fittings on the front panel.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Hekoki in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
The motherboard I'm using is the ASUS Maximus VIII Extreme with a full cover Bitspower Monoblock that I decided to remove the top cover from and have it exposed. The acrylic would probably do with some polishing however for this build, in terms of the other aesthetics, I think it should work well as is.
The two ASUS STRIX GTX 980Tis, still pretty good cards even today, with Bitspower full cover water blocks.
And the memory I'm using is the Corsair Vengeance red LED
They're pretty good how you can easily remove the tops to orientate the Corsair logo to better suit your build.
The tops could even be painted quite easily for further customisation.
And here's everything mounted inside, with tubes in so I can mark for the pass-through fittings on the front panel.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Okay, here we go, pass-through fittings are mounted and the front acrylic cover panel is complete.
You can also see the motherboard skirt panel is ready as well, with reservoir mounts on.
Fans are going underneath the case and a 60mm thick radiator on top of them at the bottom of the case. I just wanted more room and the fans fit nicely underneath. Plus, they will give a nice glow underneath the case.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from KrZaj in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
Time to start focusing my attention back to this build log and get it all up to date! I've been pretty busy as always however the build is finished and I will unveil it over the next couple of days.
I just want to show you guys all the progress first and I still need to take final photos and film it.
I'll start with two massive 10TB Seagate IronWolf HDDs that are going in the build, a plethora of red Bitspower fittings and the simple weathering effects done to the case.
Hope you guys like it. Same as the front panel that I shared before, I wanted the build to look like it's been through a Star Wars space battle. The paint effects were done by dry brushing some simple acrylic paint, a very easy effect to achieve. You can also see an acrylic motherboard skirt cover panel.
Stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from mikeeginger in Maul (modded Corsair 600C) by SimpleModz
Hey guys,
Time to start focusing my attention back to this build log and get it all up to date! I've been pretty busy as always however the build is finished and I will unveil it over the next couple of days.
I just want to show you guys all the progress first and I still need to take final photos and film it.
I'll start with two massive 10TB Seagate IronWolf HDDs that are going in the build, a plethora of red Bitspower fittings and the simple weathering effects done to the case.
Hope you guys like it. Same as the front panel that I shared before, I wanted the build to look like it's been through a Star Wars space battle. The paint effects were done by dry brushing some simple acrylic paint, a very easy effect to achieve. You can also see an acrylic motherboard skirt cover panel.
Stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from mikeeginger in Tempest (modded CM MasterCase Maker 5t) by SimpleModz
Okay guys, the build is actually finished at this time however I haven't had time to take final photos yet so I will share the last update!
Thanks for checking it out and stay tuned for final photos!
Cheers,
Alex
-
ciobanulx got a reaction from mikeeginger in Tempest (modded CM MasterCase Maker 5t) by SimpleModz
Okay guys here we go, final photos!
Here is my Tempest, Mass Effect inspired build!
What I wanted out of this is a custom system that is very well put together and also engineered quite well, taking advantage of every single inch inside the Maker 5t chassis. That and a very nice and complex yet clean looking water cooling loop. The idea was that the build would look like a spaceship engine or a reactor of some sorts, something that would belong in the world of Mass Effect! I'm pretty happy with the finished result!
Huge thanks to the amazing companies that support me in achieving my dreams!
SPECS:
Case - Cooler Master MasterCase Maker 5t
CPU - Intel Core i7 6850K
MB - ASUS Rampage V Extreme
RAM - 4 x 4GB Kingston HyperX Predator 3000MHz DDR4
GPU - 2 x NVIDIA GeForce GTX 980
SSD - 2 x 240GB HyperX Savage
HDD - 2 x 2TB Seagate Firecuda
PSU - Cooler Master V1000
Fans - 8 x Cooler Master JetFlo - red LED
Custom cables & lighting - CableMod
Custom water cooling - Bitspower
Hope you guys like it
Cheers,
Alex
-
ciobanulx got a reaction from mikeeginger in Tempest (modded CM MasterCase Maker 5t) by SimpleModz
Alright, motherboard is in, the reservoir is in, some of the tubes are in and the graphics cards have waterblocks on. I'm using reference 980s but hey it's not about the latest hardware with this build.
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
ciobanulx got a reaction from KrZaj in Tempest (modded CM MasterCase Maker 5t) by SimpleModz
I don't think I've done this many water blocks on a motherboard before, and GPUs will be added as well of course
I'm excited to pipe it all up!
I decided not to use the monoblock cover that comes with this Bitspower kit and I'll connect everything separately. It will work better with the look I am going for.
Thanks for checking it out!
Cheers,
Alex
-
ciobanulx got a reaction from Glennieboyyy007 in Maul (modded Corsair 600C) by SimpleModz
Here is what I'm currently working with! Imagine the horns and eyes lighting up once the build is finished! I'm also going with a battled and worn out weathered theme as well.
Everything was cut manually with a jig saw and a lot of filing. The cut-out at the top is a small window that will look into the top compartment.
Stay tuned for more!
Cheers,
Alex