AngeL3D_94

Thank you all and i appreciate your opinions!! So lets say, after the warranties expired, if i put a new pump with reservoir and connect the 2 Aio together so they can run in loop and not using the 2 pumps. Can they work?? I mean the 2 pumps the will be turn off, only the new pump will work. Maybe the hardest part is to connect the tubes because they are small but in theory it will work. Can they work without having dysfunctionalities?? Thanks again, sorry for my bad english....

Hello, My question is, if the 2 All in one WaterCooling systems (Corsair H110 and H75) can be in the same loop. My budget for watercooling was 260 euro, so i bought them and the nzxt g10 for the graphics card. Can i connect them together with a new reservoir and a pump?? Should i buy only the reservoir and let both pumps working together,or the one?? Can i put them new tubes?? Its possible to do eny of those?? If yes, should i expect lower temps?? Help me please... Sorry for my bad english.

Hello, My opinion is to get a gtx 750 ti or 750 for the money you want to spend. If you have extra money you should buy a gtx 660. Its your choice, a gtx 750 with 640 cuda cores or a gtx 660 with 960 cuda cores. I hope i helped you and sorry for my bad english. Let me know what you think. Best of luck.

No its not, i have read bad reviews for seidon 120v, so its still your best option the hyper 212 evo.

Hello, As Oshino Shinobu said, it depends what settings you want. Gtx 750 can give you 4k resolution experience but i dont know how many fps you will get, it depends on the games as well. For steady perfomance my opinion is a Pentium G3258 with 8 gb ram cl9 or above if you like and graphics card 2gb, i recomended gtx 750 and with the boost of the pentium you will get great gaming expirience and perfomance. The constant 100 fps you searching can only get if you tweek the settings of the game. I hope i helped you and sorry for my bad english, also an example i have gtx 780 ti and i get on games approximately 80-120 fps at high setting on 1080p. Best of Luck!!!

As the blackadder said, clean your cpu and put the paste again(rice method), make sure everything is tied up and chek again. If is not working then your cpu fan maybe has some trouble work properly. Check again and let me know if it improves somehow. Sorry for my bad english. Best of Luck!!!

Hello, What aftermarket cpu cooler you tried to install?? Do you know the temps of your Cpu before you tried to install the new one??

Glad i help!! The easiest and cheapest way is: Find a clean and soft sponge, cut four pieces and make a small holes for the screws. Mount them between the hdd and the case. I never done it, but if you try it i thing it will help you reduce the vibrations and noises. (paint it if you dont want it the way it looks). If you dont like it or is not working then look at those and decide: http://www.ebay.com/itm/SHARKOON-8-89cm-3-5-HDD-Entkoppler-Vibe-Fixer-III-Vibrationsdampfer-/361287508835?pt=LH_DefaultDomain_77&hash=item541e69e363 http://www.ebay.com/itm/Lamptron-HDD-Rubber-Screws-PRO-pure-black-/121634709158?pt=LH_DefaultDomain_3&hash=item1c51fe5ea6 http://www.ebay.com/itm/Sharkoon-HDD-Vibe-Fixer-Pro-Adattatore-vano-unitA-di-memorizza-4044951010769-/301589159175?pt=LH_DefaultDomain_101&hash=item46381d5d07 Let me know what you think.

Hello, For 334 euro my opinion is to upgrade it with that list: GIGABYTE GEFORCE GTX750 2gb , INTEL PENTIUM G3258, VENGEANCE 8GB DDR3 1600 ΜΗΖ CL9 and ASROCK H81M-VG4 R2.0.You can keep your HDDs, case and PSU. I hope i helped you a litle. Best of Luck!!

Hello, I belevie you should open the side panel and feel with your hand if its the HDD that vibrates so much and if it is the put an anti-vibration on him. On the other hand, if the fans vibrate then use anti-vibration frames and it will reduce the noise as well. Before you do that check everything is tied up. If none of those isnt working you should check the chassis for loose screws as well. I hope i helped you and sorry for my bad english. Best of Luck!!!

Hello, My opinion is to keep the 140mm fan as intake or 200mm, put the 2 rear fans 80mm as intake too and on the side keep 120mm fan at low rpms just enough to exaust the Cpu temps. I recomended to put dust filters so you dont need to clean it all the time. On my rig i have 2 140mm front as intake, 1 rear 140mm intake again, i have at the top a H110 with 4 140mm fans as exaust, with the dust filter i dont have to worry about the dust and i simply blow air with a hairdrayer and is clean again. My temps are low, motherboard 26-28°C, Cpu 26-31°C. Of course this is my opinion and it works for me, you should try it and let me know if its working for you too. I hope i helped you a litle and sorry for my bad english. Best of Luck!!!

Hello again, I dont know if this is a way to do it, check it and let me know. I will check it on my laptop and i will tell you the results.

Hello again, Yes the 650W is more than enough i think, you should go around 430-550w and for the money you want to spend on a aftermarket Cpu cooler, go with hyper 212 or check this coolers and let me know what is your opinion. RAIJINTEK THEMIS,RAIJINTEK EREBOSS,RAIJINTEK EREBOSS BLACK HEATPIPE CPU-COOLER PWM 140MM and RAIJINTEK EREBOSS CORE CPU-COOLER 140MMI dont know if they are cheaper on your country or highier so let me know. I hope i still giving you some usefull advices.

Hello, I have GTX 780Ti with Kraken G10 and Corsair H75. Room temp 26-28°C. Stock Cooling idle 33-40°C. G10-CORSAIR H75 Idle temps are 24-30°C. Full Load the temps are 42-47°C. I SET up the pump on 31% at 25°C, 60% at 35°C and 98% at 41°C. For the fans i control them from a manual system, i like it better and only on games i have them at full RPM, on idle and small applications they run at 30%. I believe its great opportunity to have it and you dont need to worry about the temps enymore. I hope i helped you. My english are messy too so i hope you understand. Best of Luck!!!

Hello, Unfortunately for your work you need CPU Power, consider to upgrade it for faster and better perfomance. If you cant buy a new motherboard and cpu then is out of the question, keep your rig steady to keep giving you perfomance and quality to your projects without forcing it but ofc it will take longer time for rendering. The 3d Softwares needs cpu acceleration. Photoshop, Ae etc, if you have a good graphic card and above 8Gb ram then its good for those purposes. I hope i helped you a litle and im sorry for my bad english. Best of Luck!!!