Gpu fans dont spin

[alphaman63]

so i have a gtx 1050 ti 4gb on an msi 970 gaming mobo and a fx8350 cpu with a 650w psu and for some reason my gpu fans do not spin at all.

whenever i play overwatch the fans do not spin and my gpu temps is going up to 90c and the fans are still not spinning i clean out the dust and tried msi afterburner and yet the fans 

still do not spin i check cpuid for my temps but it says that the fans are at 100% but they dont spin

i dont know what to do please help

[bleedblue]

RMA?

[alphaman63]

it seems that i cant do that i didnt see it on their website its a pny xlr8 gtx 1050ti

 

[alphaman63]

ummmmm its been about a year or 2 now  roughly 

EDIT:this is the exact card 4GB PNY GeForce GTX 1050 TI XLR8 OC DVI DisplayPort HDMI PCI Express 3.0 x16 VCGGTX1050T4XGPB-OC-BB Gaming Graphics Card

[bleedblue]

6 minutes ago, alphaman63 said:

ummmmm its been about a year or 2 now  roughly 

EDIT:this is the exact card 4GB PNY GeForce GTX 1050 TI XLR8 OC DVI DisplayPort HDMI PCI Express 3.0 x16 VCGGTX1050T4XGPB-OC-BB Gaming Graphics Card

Oh I thought it was new. Sounds like the fans are broken. You can replace them, Linus has a very ghetto solution in a video somewhere if you can't find official replacements from PNY.

[alphaman63]

can you find me the video please

 

[bleedblue]

2 minutes ago, alphaman63 said:

can you find me the video please

 

If you want us to notice your replies more easily, quote us or tag us like this @alphaman63.

 

Sorry bud, I'm at work right now and youtube's blocked. Just google it, I believe the title was something like "Video Card Fan Repair Guide".

[alphaman63]

Just now, bleedblue said:

If you want us to notice your replies more easily, quote us or tag us like this @alphaman63.

 

Sorry bud, I'm at work right now and youtube's blocked. Just google it, I believe the title was something like "Video Card Fan Repair Guide".

@bleedblue i just watched the video imma try to order some fans then try it out fans are dead anyways and i think i can pull it off thanks for the tip

 

[normpearii]

Did you try using something like Afterburning to force the fans to 100% to make sure they truely don't work first?
Edit: need to double read stuff @ 1 am

Seems a little weird that a dual fan GPU would lose both at only 1 or 2 years old.

[alphaman63]

2 minutes ago, normpearii said:

Did you try using something like Afterburning to force the fans to 100% to make sure they truely don't work first?

@normpearii yea i tried even cpuid was showing 100% fans but i looked in my case and they were not spining

 

[normpearii]

8 minutes ago, alphaman63 said:

@normpearii yea i tried even cpuid was showing 100% fans but i looked in my case and they were not spining

 

Yeah, that was my bad, I missed that part of your first post like an idiot.

Try unplugging the GPU from the motherboard and see if the fans can by slowly spun by hand. If you give it a light spin, they should continue on their own for a few seconds. Other than that I'd look for an obvious problem like inspect the fan wires for cuts or burns. Check the fan header on the PCB is still solidly on the board and the solder isn't broken. (I think its right next to the 6 pin power from the pictures I've looked at.)

[alphaman63]

7 hours ago, normpearii said:

Yeah, that was my bad, I missed that part of your first post like an idiot.

Try unplugging the GPU from the motherboard and see if the fans can by slowly spun by hand. If you give it a light spin, they should continue on their own for a few seconds. Other than that I'd look for an obvious problem like inspect the fan wires for cuts or burns. Check the fan header on the PCB is still solidly on the board and the solder isn't broken. (I think its right next to the 6 pin power from the pictures I've looked at.)

@normpeariii took it out i can still spin the fans by hand i took off the shroud and i saw the connector were the fans were it was a 2pin for the fans but i disconected it and reconnected and still no dice