Jump to content

So I was trying to find some information on people's experience overclocking the FX-8320 and I couldn't find much that wasn't years old which I guessed since it is a few years old now. Anyway, I was wondering what speeds and voltages and temps people this forum were achieving or if you had one in the past achieved. Any posts from 8350 or 9590 users is welcome to since they are the same chip just clocked higher.

 

I run 4.7Ghz stable at 1.43 Volts tried to go higher but seems to be the limit for now, might try uping voltage a bit more than I'm conformable with just to see if I can push it more. I get around 52-54 degrees using my H100i under full load and 34 degrees at idle. (Although the FX chips are notorious for giving false readings below 40 degrees.)

Link to comment
https://linustechtips.com/topic/801156-amd-fx-8320-overclock/
Share on other sites

Link to post
Share on other sites

40 minutes ago, dr lyo said:

So I was trying to find some information on people's experience overclocking the FX-8320 and I couldn't find much that wasn't years old which I guessed since it is a few years old now. Anyway, I was wondering what speeds and voltages and temps people this forum were achieving or if you had one in the past achieved. Any posts from 8350 or 9590 users is welcome to since they are the same chip just clocked higher.

 

I run 4.7Ghz stable at 1.43 Volts tried to go higher but seems to be the limit for now, might try uping voltage a bit more than I'm conformable with just to see if I can push it more. I get around 52-54 degrees using my H100i under full load and 34 degrees at idle. (Although the FX chips are notorious for giving false readings below 40 degrees.)

I wouldn't want to go that high tbh. I had one that I got to 4.5ghz at 1.3v with a 212 Evo. Highest temp I saw with that was 60 under full load. Anythin over 4.5ghz, would crash even if I bumped the voltage up a little so I said fuck it, a 1ghz OC is fine by me.

i5 6600k @ 4.4ghz on Hyper 212 Evo

Powercolor RX 480 8Gb Red Devil @1330Mhz

 

Bottom line:  Don't be a spaz or an 800lb gorilla when installing your expensive CPU, and you won't have any problems. --Phate.exe

 

 

Link to comment
https://linustechtips.com/topic/801156-amd-fx-8320-overclock/#findComment-10075616
Share on other sites

Link to post
Share on other sites

22 minutes ago, Krillingt75961 said:

I wouldn't want to go that high tbh. I had one that I got to 4.5ghz at 1.3v with a 212 Evo. Highest temp I saw with that was 60 under full load. Anythin over 4.5ghz, would crash even if I bumped the voltage up a little so I said fuck it, a 1ghz OC is fine by me.

It came stock with 1.425v so it must be safe, although anything over 4.7 and it resets itself at that voltage

Link to comment
https://linustechtips.com/topic/801156-amd-fx-8320-overclock/#findComment-10075672
Share on other sites

Link to post
Share on other sites

56 minutes ago, dr lyo said:

It came stock with 1.425v so it must be safe, although anything over 4.7 and it resets itself at that voltage

Try going lower and see what you get. Sure it won't be higher than 4.7 but really with an 8320, it won't benefit much.

i5 6600k @ 4.4ghz on Hyper 212 Evo

Powercolor RX 480 8Gb Red Devil @1330Mhz

 

Bottom line:  Don't be a spaz or an 800lb gorilla when installing your expensive CPU, and you won't have any problems. --Phate.exe

 

 

Link to comment
https://linustechtips.com/topic/801156-amd-fx-8320-overclock/#findComment-10075769
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×