"Over Current on USB Device"

[Piggy]

Looked online, only answers I could find to this error is to unplug the front USB header cables, which I did, and it did not solve the issue. 

Getting this specific error: "over current have been detected on your usb device!!

system will shutdown after 15 seconds to protect your mainboard!!"

 

full parts list to the build is here: https://pcpartpicker.com/list/gkRDd6

PSU is a Sparkle 550w that came with the server case

 

Any help would be greatly appreciated 

[Shreyas1]

Usb device? 

[Changis]

visually inspect all your usb ports, externally and internally, it's usually a short inside the usb plug where the pins come loose.. my usual fix if its a usb on the case is to forcefully rip out the pins with needlenose pliers so it no longer shorts and no longer can be used, and tape over it. if its on the motherboard, you might be able to disable that usb port in the biosyou should also try to seperate any short you can see (pins touching eachother, pins touching the metal around the plug etc)

[Piggy]

Something was shorting the ports on the bottom of the board even though it was sitting on cardboard... It's working now, just need to get it back in the case and hope it doesn't happen again

[Changis]

7 hours ago, Piggy said:

Something was shorting the ports on the bottom of the board even though it was sitting on cardboard... It's working now, just need to get it back in the case and hope it doesn't happen again

wait.. what? could you take a picture of your setup please?