No DVI signal detected

[Rekx]

So this error occurs everytime my bigbrother starts his computer. The eror came after he installed his new i7 3770k (from 3570k)  now we have tried to get it to work in about an hour or two. Im getting real tied and the same is my brother. Therefore i wanted to hear if any on the forum have had this eror before or know a way arround it.

 

This is what we have tried

 

1. Updated bios

2. Cleared cmos

3. Checked the cpu and cables

4. Used memok buttom

5. Tried to reset the monitor settings

6. Tried vga instead of dvi

 

The wied thing about it is that the computer starts without any erros and the Asus logo shows for 3 secounds and then it says 'no DVI signal detected'

 

This is his motherboard http://www.asus.com/Motherboards/P8Z77M/

[megadarkwood]

did it work when you tried vga?

[Rekx]

did it work when you tried vga?

 

nope. Still didn't work

[megadarkwood]

nope. Still didn't work

Could be the monitor, or the graphics card itself.

[Rekx]

Bu

 

Could be the monitor, or the graphics card itself.

 

But they worked fine before??. Also both of his screens wont display now (DVI and VGA) we have switched between the onboard graphics and the graphics card but it still wont work.

 

Also his laptop wont work with the monitors. This is so wied  :wacko:

[megadarkwood]

Bu

 

 

But they worked fine before??. Also both of his screens wont display now (DVI and VGA) we have switched between the onboard graphics and the graphics card but it still wont work.

 

Also his laptop wont work with the monitors. This is so wied

Are you sure you have the right graphics card drivers?

What are the specs?

[Rekx]

We cant even get into windows so if it dosn't work we are fucked   . 

 

The specs is

 

i7 3770k

 

Asus P8Z77-M

 

Western Digital WD Blue 500GB

 

SilverStone ST50F-ES 500W

 

Sapphire RADEON HD 7850

 

Samsung 840 pro 128gb

 

Corsair 8GB DDR3 1600MHz (2x4)

[Rekx]

Im still pretty clueless about this Eror. And i cant come up with a solution to this problem. Isn't there someone that can help with this?

[FTW_Perverse]

What happens when you boot?  Your system stays on I assume?  

 

Just no picture?  And you've tried plugging into two SEPARATE monitors- neither works?

 

Correct input is selected on the monitor?

[MJSBLUES]

Try plug it in the on board graphics, does that work?

The cpu could be faulty, does it POST?

[Rekx]

Try plug it in the on board graphics, does that work?

The cpu could be faulty, does it POST?

 

What happens when you boot?  Your system stays on I assume?  

 

Just no picture?  And you've tried plugging into two SEPARATE monitors- neither works?

 

Correct input is selected on the monitor?

 

'the wied thing about it is that the computer starts without any erros and the Asus logo shows for 3 secounds and then it says 'no DVI signal detected'

 

'A) we have switched between the onboard graphics and the graphics card but it still wont work.'

[FTW_Perverse]

Try removing your graphics card and just using your onboard graphics, for the sake of trying to get a display and making it into the bios / OS.

[Rekx]

Try removing your graphics card and just using your onboard graphics, for the sake of trying to get a display and making it into the bios / OS.

 

Still happens

[srex]

HI folks, it was my computer. Just want to let you guys know its fixed. So my brother told me to try and put the rams to the blue inputs, and then back the to black, when i put i back to the black ones, i didnt insert them properly..... lost 6 hours there lol. but thanks alot for all your help appreciate it

#Solved