I need your guys help

[Luminant]

Does anyone know how to fix this? I have a graphics card but when i plug it in the computer doesnt start at all. Ive tried 3 graphics all the same thing ive replaced the ram and cleard the cmos doesnt do anything.

Untitledvideot_20160806_130119.mp4

[Skiiwee29]

16 minutes ago, Luminant said:

Does anyone know how to fix this? I have a graphics card but when i plug it in the computer doesnt start at all. Ive tried 3 graphics all the same thing ive replaced the ram and cleard the cmos doesnt do anything.

Untitledvideot_20160806_130119.mp4

Which CPU are you using. 

[Luminant]

6 minutes ago, legacy99 said:

Which CPU are you using. 

Intel pentium 32020 on an msi H61m-P20 (G3)

8Gb's of mixed ram 

Shaw Evo-775Max

[Skiiwee29]

7 minutes ago, Luminant said:

Intel pentium 32020 on an msi H61m-P20 (G3)

8Gb's of mixed ram 

Shaw Evo-775Max

That chip from what I can see does not have on-board graphics. You would need a dedicated graphics card. 

[Skiiwee29]

1 minute ago, legacy99 said:

That chip from what I can see does not have on-board graphics. You would need a dedicated graphics card. 

 

9 minutes ago, Luminant said:

Intel pentium 32020 on an msi H61m-P20 (G3)

8Gb's of mixed ram 

Shaw Evo-775Max

Here is the official spec sheet from Intel on your CPU.

 

http://ark.intel.com/products/37160/Intel-Pentium-Processor-T3200-1M-Cache-2_00-GHz-667-MHz-FSB-Socket-P

[Luminant]

3 minutes ago, legacy99 said:

 

Here is the official spec sheet from Intel on your CPU.

 

http://ark.intel.com/products/37160/Intel-Pentium-Processor-T3200-1M-Cache-2_00-GHz-667-MHz-FSB-Socket-P

Intel Processor G2020 is the one i have i missed spelled it my bad.

[Skiiwee29]

Just now, Luminant said:

Intel Processor G2020 is the one i have i missed spelled it my bad.

http://ark.intel.com/products/71070/Intel-Pentium-Processor-G2020-3M-Cache-2_90-GHz

 

ok so that does have on-board. Do you have a dedicated card you can use to test to see if you get a post? When its on like that, if you press the power button, does the system shut down right away, or do you have to hold it in?

[Skiiwee29]

Also, you can try taking  your RAM out and try each individually in each slot. I had a similar issue with my Z97 board where slot 1 was dead, and if I had a stick in there, I would get the same thing, just a solid black screen, no post. 

[Luminant]

Just now, legacy99 said:

http://ark.intel.com/products/71070/Intel-Pentium-Processor-G2020-3M-Cache-2_90-GHz

 

ok so that does have on-board. Do you have a dedicated card you can use to test to see if you get a post? When its on like that, if you press the power button, does the system shut down right away, or do you have to hold it in?

It has on board and i have a two desicated cards i can use  but when i plug them in its the same black sceen with no post. And i have to hold the power to trun it off.

[Skiiwee29]

so my guess then is the RAM. Try my above post with the RAM sticks. 

[Luminant]

Just now, legacy99 said:

so my guess then is the RAM. Try my above post with the RAM sticks. 

ive tried that already and ive tried  my old set of ram still the same thing

[Skiiwee29]

Just now, Luminant said:

ive tried that already and ive tried  my old set of ram still the same thing

I think its your motherboard honestly. Do you have another board you can test the CPU in?

[Luminant]

3 minutes ago, legacy99 said:

I think its your motherboard honestly. Do you have another board you can test the CPU in?

Nope i guess i can buy a new motherboard then. Thanks for your help.