Bios Temp and Software Core Temp

[thokzz]

I just upgraded my unit

 

AMD A6 6400K

MSI A68HM-E33 V2

POWERCOLOR HD7850

8GB HYPERX 1866

HX620W

CoolerMaster Seidon 120v

 

Please dont mind the Dust on the picture as i already cleaned it.

Also Pump is connected to PSU (not onboard)

and Radiator Fan is also connected to PSU

 

On my bios shows 37 celcius

but using Speccy/HWinfo/HWmonitor, I run Furmark CPU Stress and it pumped to 93celcius. Please help, This is the same setup i used and i just got the NEW BOARD NEW PROCIE and NEW GPU. Is my board reporting WRONG Temp on Windows?

 

It shows this:

 

 

 

 

[jimakos234]

Put a fan on the radiator!

[thokzz]

Put a fan on the radiator!

 

There is actually a fan on the radiator. it is just on the other side of the Case (TOP). It is actually Ventilating the RADIATOR Good enough as i can feel the Cool Air flowing through the Radiator.

[blackadder]

1.35 vcore, should it be that high? I don't know much amd

[jimakos234]

Did u tried connecting the pump to the cpu cooler fan header?

Also is this on the stock voltage?

[thokzz]

Did u tried connecting the pump to the cpu cooler fan header?

Also is this on the stock voltage?

 

Yep nothing changed much... the weird thing is on my BIOS it reports 37-38-39 and not going any higher (i can say that this is IDLE) but on my windows it shows 57 on idle.. Damn im so confused.

[jimakos234]

Yep nothing changed much... the weird thing is on my BIOS it reports 37-38-39 and not going any higher (i can say that this is IDLE) but on my windows it shows 57 on idle.. Damn im so confused.

Maybe you have applied the thermal paste incorrectly or just not enough then?

Otherwise something is wrong, hardware-wise

[blackadder]

Yep nothing changed much... the weird thing is on my BIOS it reports 37-38-39 and not going any higher (i can say that this is IDLE) but on my windows it shows 57 on idle.. Damn im so confused.

the lower cpu temps can be wrong on amd, what are load temps?

[thokzz]

Maybe you have applied the thermal paste incorrectly or just not enough then?

Otherwise something is wrong, hardware-wise

 

I'll get back to you, I know that i just applied the right amount of paste.. ill strip this cpu down again...

[thokzz]

the lower cpu temps can be wrong on amd, what are load temps?

 

Furmark Temps CPU Stress goes 93 celsius

[blackadder]

Furmark Temps CPU Stress goes 93 celsius

yea, pretty high, check or lower voltage if its to high.

[thokzz]

I tried OPEN HARDWARE MONITOR, My idle sits 22 celsius and FURMARK STRESS TEST SHOWS 48.8 MAX but on SPECCY It is 96 Deg C

[thokzz]

I tried OPEN HARDWARE MONITOR + SPEEDFAN software shows LOW TEMPS

 

I tried CPUID HWMonitor and SPECCY shows VERY HIGH TEMPS

 

This shot is on IDLE...

I touched my Seidon 120v and it is cold, radiator is cold too...

 

 

Im just wondering why if my TEMP is too high, why does my CPU not throttle my FAN, my RADIATOR fan is now connected to the CPU Pin header... Pump is still directly connected to the PSU.

 

[blackadder]

I tried OPEN HARDWARE MONITOR, My idle sits 22 celsius and FURMARK STRESS TEST SHOWS 48.8 MAX but on SPECCY It is 96 Deg C

set fans to max and see if temps decrease on both and in bios.

[thokzz]

Thanks guys i think the bios is more or less the best way to go.. http://www.tomshardware.com/faq/id-2122665/understanding-temperature-amd-cpus-apus.html