Stressing a devis caonyon cpu correctly?

[CalumGiff]

3 hours with intel xtu, 10 tests on intel burn test max settings. couple of hours running prime95, and then go back on to xtu overnight? Will that be enough?

[thekeemo]

yes

[CalumGiff]

yes

good, thanks. I'm a wee bit stressy cause its my first time OCing

[vSyNd1c4t3]

good, thanks. I'm a wee bit stressy cause its my first time OCing

 

Worse case scenario... You crash during some important rendering or gaming if you don't find a fully stable speed/voltage. Not the end of the world.

 

But sounds like you did a lot of good testing, and should be good.

 

What were your results?

[CalumGiff]

Worse case scenario... You crash during some important rendering or gaming if you don't find a fully stable speed/voltage. Not the end of the world.

 

But sounds like you did a lot of good testing, and should be good.

 

What were your results?

im only half way through those tests currently, this was just to make sure id have done enough when im finished. So far no crashes at 4.4Ghz @ 1.190V

Don't wanna take it too high im only on a hyper 212, getting max load temps at around 67C, 73C in intel burn test