Help setting up arduino

Mbarton · February 21, 2015

So I have a client who has a surge system that notifies the user when something is damaged due to

lightning

(or some other kind of damage)

The problem they have and the reason they called me to help.

Is the surge device notifies the user by turning on a small red L.E.D on a box that in most building, is no where to be seen.

So they decided to take the sensors have it go into this small Arduno.

And then go to this board (https://drive.google.com/file/d/0B2DzSCSX-QhWS1BQbzZQVVR3ZDQ/view?usp=sharing) and send the data over WIFI (thats key here is has to be WIFI I tread to get them to use lan but they are set on it being over wifi) and go to a database where it will wright the data in the specified felds. (I already made a mysql database with phpmyadmin so they can edit it themselves.)

And they wanted the data from the mini Arduno to go into this over serial I don't even know if serial is capable of that but the serial port is not working on the board nor does the lan. And its just a pain to deal with so I told them to send it back and will get this ardino (http://www.radioshack.com/arduino-yn-linux-microcontroller-board-with-wi-fi/2760357.html#prefn1=brand&prefv1=Arduino&start=1)

I also told them do-to space restrictions that will be replacing both boards with the new Arduno so now I have to figure out how to get the 6/ 7 leads from the sensors to this board probably by using a bread board breakout I would assume. And then have this board send the data to the database. I don't really have to much experience with that kind of thing and ive never realy used a Arduno like this so I was hoping some of you might have some experience with this kind of thing

WHAT NEEDS TO BE DONE

*Have the sensors connected to the board

(I would assume we need a breadboard for this since the Arduno only has a few connections)

*have it connected to the wifi

*When a sensor goes off have it send the data to the data base over the wifi fill in date/time it accord and what sensor went off

Is the ardino that I picked out capable of doing this?

And if so can anyone help woth setting this up?

I have 10$ for someone who can help me.

Decon · February 21, 2015

So I have a client who has a surge system that notifies the user when something is damaged due to

lightning

(or some other kind of damage)

The problem they have and the reason they called me to help.

Is the surge device notifies the user by turning on a small red L.E.D on a box that in most building, is no where to be seen.

So they decided to take the sensors have it go into this small Arduno.

And then go to this board (https://drive.google.com/file/d/0B2DzSCSX-QhWS1BQbzZQVVR3ZDQ/view?usp=sharing) and send the data over WIFI (thats key here is has to be WIFI I tread to get them to use lan but they are set on it being over wifi) and go to a database where it will wright the data in the specified felds. (I already made a mysql database with phpmyadmin so they can edit it themselves.)

And they wanted the data from the mini Arduno to go into this over serial I don't even know if serial is capable of that but the serial port is not working on the board nor does the lan. And its just a pain to deal with so I told them to send it back and will get this ardino (http://www.radioshack.com/arduino-yn-linux-microcontroller-board-with-wi-fi/2760357.html#prefn1=brand&prefv1=Arduino&start=1)

I also told them do-to space restrictions that will be replacing both boards with the new Arduno so now I have to figure out how to get the 6/ 7 leads from the sensors to this board probably by using a bread board breakout I would assume. And then have this board send the data to the database. I don't really have to much experience with that kind of thing and ive never realy used a Arduno like this so I was hoping some of you might have some experience with this kind of thing

WHAT NEEDS TO BE DONE

*Have the sensors connected to the board

(I would assume we need a breadboard for this since the Arduno only has a few connections)

*have it connected to the wifi

*When a sensor goes off have it send the data to the data base over the wifi fill in date/time it accord and what sensor went off

Is the ardino that I picked out capable of doing this?

And if so can anyone help woth setting this up?

I have 10$ for someone who can help me.