Jump to content

Question burn DVD MDisc

cloudff7
By cloudff7
in Storage Devices
 Share
Posted

M-Discs don't require anything special on the software side.

 

Windows Explorer can burn discs all by itself.

 

If you need more features, ImgBurn can do just about anything related to burning discs.

I sold my soul for ProSupport.

Link to post
Share on other sites
Posted
2 minutes ago, cloudff7 said:

any software protect corruption during burning

Every piece of burning software I've used over the last nearly thirty years has read the entire disc back and verified its contents before declaring the burn complete and ejecting the disc. If an error is encountered, the disc is declared bad and it asks for a new blank to try again.

I sold my soul for ProSupport.

Link to post
Share on other sites
Posted
  • Author

I only used imgburn but I don't know if it's the best freeware. Is there any setting in it that you think is important to activate for good burning without errors?

 

I see that some Lite-On iHAS 122 models support M-Disc DVD but I have the Lite-On ATAPI iHAS 122 F EL06 model and I don't know if it supports M-Disc DVD burning. What is the best software to check and which software is good for updating the firmware of this drive?

Link to post
Share on other sites
Posted
12 minutes ago, cloudff7 said:

I only used imgburn but I don't know if it's the best freeware. Is there any setting in it that you think is important to activate for good burning without errors?

Stop overthinking every single step of your backup process. Just make sure "verify" is checked so it will do that confidence check after burning.

 

Again, disc burning is a problem that was solved decades ago.

 

If you're that worried, burn two copies.

 

12 minutes ago, cloudff7 said:

What is the best software to check

If the spec sheet for a DVD burner doesn't say it's capable of burning M-Discs, and/or it's not on the list, assume it's not capable of burning M-Discs. There are no special requirements for drives to burn Blu-Ray M-Discs (except that you use a Blu-Ray burner).

 

https://www.mdisc.com/drive-compatibility.html

 

https://www.mdisc.com/faq.html#:~:text=The M-Disc DVD requires,to an M-Disc DVD.

 

12 minutes ago, cloudff7 said:

which software is good for updating the firmware of this drive?

That's not something you need to be concerned with.

I sold my soul for ProSupport.

Link to post
Share on other sites
Posted

I thought since the original MDisc manufacturer went bankrupt, and IIRC verbatim started making them up there were lots of questions about whether it was the same now.

 

So you end up with things like this. (Reddit Post)

 

Imgur Link with Images from the post

 

I don't know, it would make me hesitant to trust an optical media disc for long term storage. However as with anything, it should never be your only backup method.

Link to post
Share on other sites
Posted
5 hours ago, cloudff7 said:

this drive support M-Disc?

No. You keep listing a DVD drive. You can't burn BluRay discs in a DVD drive. You need a Blu-Ray Burner with M-Disc support if you want to do that. Firmware (software) will not change the hardware.

 

From what I'm reading, you may or may not find real M-Discs anyways. However even if they are Blu-Rays you still need a Blu-Ray burner.

Link to post
Share on other sites
Posted
  • Author
1 hour ago, OhioYJ said:

Não. Você continua listando uma unidade de DVD. Você não pode gravar discos BluRay em uma unidade de DVD. Você precisa de um gravador Blu-Ray com suporte a M-Disc se quiser fazer isso. O firmware (software) não mudará o hardware.

 

Pelo que estou lendo, você pode ou não encontrar M-Discs de verdade, de qualquer forma. No entanto, mesmo que sejam Blu-Rays, você ainda precisa de um gravador de Blu-Ray.

i me reffer MDisc DVD Lite-On ATAPI iHAS 122 F EL06

Link to post
Share on other sites
Posted
15 hours ago, OhioYJ said:

You keep listing a DVD drive. You can't burn BluRay discs in a DVD drive.

There are M-disc DVD as well as BR. M-disc refers to the type of data layer, and can be used in both types of media.


the only requirement for burner to burn M-disc is power, Hance not all laser burners are compatible. if your drive burner don't list m-disc in spec, or don’t have the m-disc Logo on it, assume it’s not compatible.


i will also answer your NEXT question.

is it possible to mod laser burner FW with custom firmware to burn it anyway, yes. Would i trust the data on such DVD/BR, no.

   
 
 
 
Spoiler
CPU : Intel 14gen i7-14700K
COOLER :  Thermalright Peerless Assassin 120 White + Thermaltake toughfan 12 white + Thermal Grizzly - CPU Contact Frame Intel 13./14. +  Coollaboratory Liquid Ultra
GPU : MSI RTX 2070 Armor @GPU 2050MHz Mem 8200MHz -> USB C 10Gb/s cable 2m -> Unitek 4x USB HUB 10 Gb/s (Y-HB08003)
MOBO : MSI MEG Z690 UNIFY
RAM :  Corsair VENGEANCE DDR5 RAM 64 GB (2 x 32 GB) 6400 MHz CL32 (CMK64GX5M2B6400C32)
SSD : Intel Optane 905P 960GB U.2 (OS) + 2 x WD SN850X 4TB + 2 x PNY CS3140 2TB + PLX88024 PCIe switch (PCIE 4.0 x8 -> 4 x M.2 PCIe 4.0 x4) -> 4 x Plextor M8PeG 1TB + flexiDOCK MB014SP-B -> Crucial MX500 2TB + GoodRam Iridium PRO 960GB + Samsung 850 Pro 512GB
HDD : WD White 18TB WD180EDFZ + SATA port multiplier adp6st0-j05 (JMB575) ->  WD Gold 8TB WD8002FRYZ + WD Gold 4TB WD4002FYYZ + WD Red PRO 4TB WD4001FFSX + WD Green 2TB WD20EARS
EXTERNAL
HDD/SSD :  		XT-XINTE LM906 (JMS583) -> Plextor M8PeG 1TB + WD My Passport slim 1TB + LaCie Porsche Design Mobile Drive 1TB USB-C + Zalman ZM-VE350 -> Goodram IRDM PRO 240GB
PSU :  Super Flower leadex platinum 750 W biały -> Bitfenix alchemy extensions białe/białe + AsiaHorse 16AWG White 
UPS :  CyberPower CP1500EPFCLCD -> Brennenstuhl primera-line 8 -> Brennenstuhl primera-line 10
LCD : LG 32UD59-B + LG flatron IPS236 -> Silverstone SST-ARM11BC
CASE :  Fractal R5 Biały + Lian Li BZ-H06A srebrny + flexiDOCK MB014SP-B + 6 x Thermaltake toughfan 14 white + Thermalright TL-B8W
SPEAKERS :  PC -> TOSLINK 2m -> Linkfor ULK073 1x4 Digital SPDIF Splitter (B07MJ4TLWQ) -> TOSLINK 0.5m -> Aiyima A80 ( or Aune S6 Pro -> RCA ->  Aiyima A80 ) -> Polk S20e black -> Monoprice stand 16250
HEADPHONES : PC -> TOSLINK 2m -> Linkfor ULK073 1x4 Digital SPDIF Splitter (B07MJ4TLWQ) -> TOSLINK 0.5m -> Aune S6 Pro -> 2 x Monoprice Premier 1.8m 16AWG 3-pin XLR -> Monoprice Monolith THX AAA 887 -> 4-pin XLR na 2 x 3.5mm 16 cores OCC 2m Cable -> HiFiMAN Edition XS -> sheepskin pads + 4-pin XLR na 2 x 2.5mm ABLET silver 2m  Cable -> Monoprice Monolith M1060 + Brainwavz HM100 -> Brainwavz sheepskin oval pads + Wooden double Ɪ Stand + Audio-Technica ATH-MSR7BK -> sheepskin pads + Multibrackets MB1893 + Sennheiser Momentum 3 +  Philips Fidelio X2HR/00 + JBL J88 White
MIC :  Tonor TC30 -> Mozos SB38
KEYBOARD : Corsair STRAFE RGB Cherry MX Silent (EU) + Glorious PC Gaming Race Stealth Slim - Full Size Black + Kensington VeriMark / PQI MyLockey
MOUSE :  Logitech MX ERGO + 2 x Logitech MX Performance + Logitech G Pro wireless + Logitech G Pro Gaming -> Hotline Games 2.0 Plus + Corsair MM500 3xl + Corsair MM300 Extended + Razer goliathus control
CONTROLLERS :  Razer Wolverine V3 Tournament Edition 8K PC (B0F94C9C43) -> brainwavz audio Controller Holder UGC2 + Microsoft xbox series x controller pc (1VA-00002) + Ravcore Javelin
NET :  Intel E810-XXVDA2 2 x 25GbE SFP28 (PCIE 4.0 x8) -> 2 x FTLX8571D3BCV-IT -> 2 x Digitus (DK-HD2533-05/3) -> Qnap TS-932X-2G + 2 x ASUS ZenWiFi Pro XT12
NAS :  Qnap TS-932X-2G -> Kingston 16GB 2400Mhz CL14 (HX424S14IB/16) -> 9 x Crucial MX500 2TB -> 2 x FTLX8571D3BCV-IT -> Noctua NF-P14s redux 1200 PWM -> QNAP TR-004
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Storage Devices

×