Ground usb-c Cable

[Paulo_Andre]

I recently made a lot of cable management in my setup and moved all my cables to a usb-c connection.

However, I also noticed that my charger only has 2 pins (type C plug), so now my computer (it's a laptop) and all my devices are not grounded.

Would it be a good idea to make a usb-c cable and connect the GND pin to the ground of the power outlet, to ground the whole system?

[Heats with Nvidia]

Does any of the other devices have ground? If yes, everything connected to each other also has ground.

Even if not, it doesn`t really matter besides some rare edge cases and you would notice if you had one of those.

[Paulo_Andre]

No, nothing has ground... and I'm one of those "edge cases". I can feel the current flowing (or something) when I touch the chassis with my hand, I've always felt when some device is not grounded. It's not dangerous, but it's annoying and I wanted to fix it.

[saintlouisbagels]

Don't really know too much about electronics, but can't you just plug the USB charger into a power strip and plug the power strip into the wall?

[Heats with Nvidia]

In this case, grounding the whole thing makes sense. The easiest way to do this, is connect something that is grounded, the other way to do it, is to make a cable that connects anything in this setup to ground.