Pc not powering after dropping

[YoungOne69]

Was putting my pc in its box and accidently let go mid way and dropped into the box with the Styrofoam covering. When I got hoke and plugged in my pc it doesn't turn on. The peripherals that have RGB and have plugged into to the motherboard light up but no power comes on when I try turn it on. Could the power supply be the issue, but the peripherals rgb light up.

[SimplyGone]

check your 24 pin ATX and your 12V EPS connectors.  Then check your PCIe connactors in your graphics card if you have one.  Check BOTH ends in the boards and in the PSU

[Alvin853]

16 minutes ago, YoungOne69 said:

The peripherals that have RGB and have plugged into to the motherboard light up but no power comes on when I try turn it on

I'm pretty sure for RGB to light up power needs to come on, so what do you mean "no power comes on"? No output on display? Are fans spinning? Any debug LEDs on the mainboard? Check that RAM is still seated properly, same for GPU

[YoungOne69]

Hi. Ye so when I press the power button on my front pc there is no power to the system. No fans spin or nothing starts. I've checked the 24 pin connector and the cpu connector and nothings changed. I've bought a new psu and motherboard and replaced both yet there is not power when I press the power button. No fans spins. Nothing comes on. I even bought a atx motherboard switch (on/off) power cable thinking that might be the issue but thats not the case either. Not sure what to do