Search the Community

Please and thank you before I start, any help appreciated and if this exists else where and isn't 1-3 years old, point me at it. Also If this would be better suited somewhere else, point me there too. I want to transition from FreeNAS to something more capable, as I need GPU pass through for a VM, but I literally barely know how to use FreeNAS. I have managed to set it up how I like and the less difficult the transition, the better. I understand that I may need to rebuild my arrays from scratch. I understand I will have to redo the iocage/jails/plugins that FreeNAS currently has “perfectly” setup. I guess, first question: Can I move a real FreeNAS install, to a VM FreeNAS in an Unraid install? Second question: Do I need to move them, couldn’t I just point to the USB as a boot drive and it would just “work”? Or no? Question the third: Does someone have step by step instructions for me to follow? Fourth: Is my server powerful enough? It handles FreeNAS fine, but the dinky VM I currently use, feels so under powered. Allocated 4 cores and 8gb of ram. And the last question: If not Unraid, then what? Cost for Unraid is not unreasonable for a setup that is better than my experience with FreeNAS. Ie zero data loss in 4 years, but countless plugin rebuilds. For some reason eventually they just didn’t work properly anymore, and an upgrade of FreeNAS and new installs of plugins was a major hassle, but doable. Requirements I’d like to add an RTX2070 for VM use and set up a VM. Also if I have to rebuild from scratch, set up either 16x4TB-(2x4TB)=~56TB for 2 drive failure, or 16x4TB-(4x4TB)=~48TB for 4 drive failure. Current Server Configuration: Software OS = FreeNAS 11.3-U5 Plugins = Plex Pass, Sonarr, Radarr, MineOS VM = Ubuntu 18.04, running PIA and Transmission Hardware CPU = 2x Intel Xeon X5675 @ 3.07GHz RAM = 6x SK Hynix 16GB 2Rx4 PC3L-10600R-9 DDR3 1333 ECC Motherboard = ASUS Z8NA-D6C HBA = 2x SAS 9211-8i Boot USB RAID 1 = 2x Toshiba 32GB Pool: System RAID 1 ZFS = 2x 2TB WD RED Pool: NAS RAIDZ2 ZFS = 16x 4TB WD RED Case = Chenbro RM41416 4U Rackmount Power Supply = 3x Emacs MX1-5375p 375W (in n+1 Redundancy) Cooler = 2x Thermaltake Water 3.0 Performer C

Hi, im trying to create a transition for some text and my problem now is that i have a .6s delay because i want it to start after another transition has begun, although i would not want the delay to be .6s for transitioning out. This piece of code is a box with text in it, when u hover, it does a bouncing animation and when the bouncing ends it increases in height which has kind of a dropdown effect, that new area that the extra height creates is where the transition for the other piece of text comes in. The transitioning in is fine, its just that the height decreases out faster than the text disappears which looks ugly. <a href="#" id="buy_left" class="buy"> BUY <p class="price">2 USD</p> </a> .buy { color: #404d63; background: white; text-align: center; line-height: 50px; width:80px; height: 50px; position: absolute; font-size: 30px; text-decoration: none; transition: background 0.5s, color 0.5s, height 0.3s ease-in-out 0.5s; } .buy:hover { background: #84ba71; color: white; animation: bounce1 0.7s; height: 80px; } .buy:hover .price {opacity: 1;} #buy_left { margin: 120px 0 0 4%; z-index: 100; } .price { color: #b22525; font-size: 20px; font-weight: bold; position: absolute; opacity: 0; margin: -15px 0 0 14px; transition: opacity 0.4s ease-in 0.6s; } @keyframes bounce1 { 0%, 50%, 100% { -webkit-transform: translateY(0); transform: translateY(0); } 25% { -webkit-transform: translateY(-10px); transform: translateY(-10px); } 75% { -webkit-transform: translateY(-10px); transform: translateY(-10px); }

I'm contemplating how I should go about switching from an old AMD FX platform to a new Intel Skylake platform. Recently I upgraded my GPU to an R9 390, but my old FX-6100 CPU is bottlenecking the card in CPU intensive games. I'm aware that it is recommended to reinstall the OS when switching CPU/motherboard platforms for the sake of drivers, etc. I'm not worried about losing personal files on the SSD that my OS is on, as I have all those files on a separate hard drive, or backed up online. The real question I want to ask: Is there a way to simply reinstall Windows 10, (which I upgraded from Windows 7,) without having to buy a new copy of Windows 10?

Basically I'm trying to make it so that when you hover over the social media icons the red bottom border eases both in and out, currently it only eases in and instantly hides when I hover away. I'd like it so it also eases out the same as it does in. It's odd because it seems to work fine with background colour transitions. But this border bottom doesn't seem too. Here is a fiddle of what I currently have. I'll also provide a code snippet below: <footer> <p>Created By © GR412 2015</p> <div id="social-container"> <a href="https://www.youtube.com/user/GR412" target="_blank"> <img src="images/CRAFT412 - YouTube Button.png" alt="YOUTUBE ICON"></a> <a href="http://www.twitch.tv/gr412" target="_blank"> <img src="images/CRAFT412 - Twitch Button.png" alt="TWITCH ICON"></a> <a href="https://twitter.com/GR412" target="_blank"> <img src="images/CRAFT412 - Twitter Button.png" alt="TWITTER ICON"></a> <a href="https://www.facebook.com/GR412" target="_blank"> <img src="images/CRAFT412 - Facebook Button.png" alt="FACEBOOOK ICON"></a></div> </footer> footer {height: 45px; background: white; margin: 20px 0 20px 0; border-radius: 5px; box-shadow: 0px 1px 3px 0px; color: #BDBDBD; line-height: 45px; position: relative;}footer p {line-height: 45px; display: inline;}#social-container {float: right; margin: 0 5px 0 5px;}#social-container a {float: left;}#social-container img {height: 39px; padding: 3px; transition: all 0.35s ease;}#social-container img:hover {border-bottom: 3px solid #C62828; padding-bottom: 0;}

Hi! 4K is slowly becoming the new standard and I'd like to do a transitional build. One that does both. 1080p for the more intensive games and 4K for the less. I will also edit videos and create games on this machine. Once I upgrade to a new system, a single GPU will handle 4K smoothly. I have a 1080p monitor and all the peripherals, as well as an HDD. These are the specs I'm thinking about: Gigabyte Z97P-D3 CM Storm Scout II Gaming Ghost White 2×MSI Radeon R9 390 8GB Kingston SSDNow 120GB HyperX Savage 2400MHz 16GB Samsung 28" 4K LED 28D590D Windows 10 This would (currently) cost me $2274.62 which I can afford. Should I do this now or wait until the 100-series of motherboards? Should I do this at all?

i have 3x viewsonic va2213w 22" monitor setup. i originally had them setup in landscape mode and everything worked fine. but when i changed them into portrait mode a lot of issues arose. they appear correctly setup, amd ccc plus windows see's them with their correct orientation. the resolutions are all set up fine. the only issue i have is when i move my mouse to pass from monitor to monitor it is fine on my middle monitor, however it appears halfway down my left monitor and sideways. and the same on my right. when i move a program from one monitor to the other it keeps the correct orientation. ive tried to find a mouse monitor transition option to see if there is a way to adjust how my mouse moves from monitor to monitor. i dont understand how everything else works and recognises the monitors are portrait exept the mouse layout, does anyone else have any idea how i can fix this please?