Jump to content

yesman

Member
  • Posts

    177
  • Joined

  • Last visited

Posts posted by yesman

  1. hi iv got an d'link dap 3310 and finding it hard to set up ,for some reason i cant get into the settings of it ,iv look at the manual and it says i have to change my laptop IP address to the same as my AP but i dont know how to do it does anyone know how i can do it?thansk

  2. 1 minute ago, panther420 said:

    Found these drivers online:

    https://github.com/gnab/rtl8812au

    Follow the steps in the guide provided on the page, they're relatively straightforward.

    Otherwise, this video might be more beginner-friendly.

     

    iv tried it but it still wont work?i dont know what to do?how would i do it from the disk i got with it ?

  3. 5 minutes ago, panther420 said:

    What card is it? If it isn't installed and working out of the box, usually you can install a package from the repositories containing a driver for it. If not, more and more manufacturers are starting to provide their own Linux drivers on their website.

    hi am using a Realtek RTL8812AU    https://www.aliexpress.com/item/Realtek-RTL8812AU-802-11AC-USB3-0-1200mbps-Dual-Band-2-4G-5G-Wireless-Network-Adapter-USB/32838722743.html?spm=a2g0s.9042311.0.0.45654c4dyDxYAM,  i did get an drive disc but i dont know how to install it the drivers for it

  4. 20 minutes ago, Lurick said:

    Go to the network and sharing center > Change adapter settings > Right click on the adapter > Properties > Click TCP/IPv4 > Properties > Use the following IP address:

    192.168.0.1

    255.255.255.0

    Click OK > Navigate to the default IP > Configure it

     

    When done follow the steps but select "Get an IP automatically" and you're done.

    still nit working ,i ont know what do

  5. 7 minutes ago, Lurick said:

    You've connected it to the network and tried to access it via 192.168.0.50?

    If that's not your local subnet you should be able to connect it directly to your device with an ethernet cable and set your local IP address to 192.168.0.1 with a subnet mask of 255.255.255.0

    hi yeah iv  connect it directly with ethernet cable it dosent show up ,when i go on to browser and type the default ip nothing loads,and this is what i get when window try fixing 

    ml;lk.PNG

  6. 10 hours ago, SuperShermanTanker said:

    I don't know if it would I'm mainly used to working on custom built PCs and when repairing laptops and prebuilts I just format the whole drive after I back up all the files if there was any files to back up

    and I just do a full reinstall which microsoft made it easier and easier to do with a windows disk or USB drive with the windows installer I can show you where you can get a windows key for about $30 USD and you  can use that to install windows 10 onto the laptop

    Yeah please where can you get a windows key from 

×